Tripp in3008kb Mode D'Emploi

Page de 7
2
3
PS/2 Installation
1.
Shut down your computer
.
2.
Plug the keyboard's USB connector into the PS/2 
adapter included with the keyboard.
3.
Plug the PS/2 adapter into the PS/2 keyboard port 
on your computer
. (Note: The PS/2 keyboar
d port 
may be marked in purple, with or without a 
keyboar
d icon. If  you ar
e uncertain which port to 
use, consult your computer's documentation.)
4.
Restart your computer
. The keyboard should be 
ready to use.
USB Installation
1.
Plug the keyboard's USB connector into an 
available USB port on your computer or USB hub.
2.
Installation is plug-and-play for 
W
indows 
ME/2000/XP/V
ista. 
3.
The keyboard should be ready to use. 
(Note: If the keyboar
d is not r
ecognized by 
your computer's  operating system, try
 
restarting your computer
.)
USB Connector
K
e
yboard
USB P
o
rt
Special Features
It can be used in a damp, acidic or alkaline environment
It can be cleaned with alcohol or disinfectant
It can be used safely in the presence of dust or sand
It can be rolled up for compact storage while traveling
It includes a USB wired cable and PS/2 adapter
Impor
tant W
arnings
Do not use the keyboard on an uneven or unstable surface
Do not puncture, cut or abrade the surface of the keyboard
Do not allow oil, acetone or similar solvents to touch the keyboard
Do not fold the keyboard nor crease it when rolling it up
T
urn of
f your computer before connecting the keyboard via PS/2
System Requirements
W
indows
®
98/ME/2000/XP/V
ista
A
vailable USB or PS/2 port
IN3008KB & IN3009KB Installation
IN3010KB Installation
1.
Y
our IN3010KB (2.4 GHz) 
W
ireless Multimedia 
Flexible Keyboard package includes a wireless 
flexible keyboard, USB receiver
, CD with driver 
and AAA
batteries.
2. 
Remove the battery compartment lid on the left side 
of the keyboard and insert two 
AAA
batteries 
provided. Be careful not to load the batteries 
incorrectly—look for guide marks inside the 
compartment to check correct battery orientation. 
Replace the battery compartment lid.
3. 
Connect the USB receiver to an open USB port on 
your computer or to a port on an additional USB 
hub. 
The blue LED indicator on the receiver will 
flash. 
This indicates that the receiver is connected 
and functioning.
4. 
Next, press the 
W
indows key on the keyboard. If this key is functional, the connection is complete and 
the keyboard is operating normally
5. 
If you have 
W
indows 98 or 2000 operating system, install and run the CD driver included to make all 
the multimedia keys functional. 
The driver will automatically start to guide you step-by-step in 
activating all multimedia functions and completing the installation. 
NOTE: The maximum transmission 
distance is appr
oximately 30ft (10m). The operational distance will vary based on the envir
onment the 
keyboar
d is used in and the amount of interfer
ence encounter
ed.
T
roub
leshooting 
Y
our IN3010KB 
Wireless Multimedia Fle
xib
le K
e
yboar
d
If you have completed all installation steps and the
keyboard still does not function, the r
eceiver
and
transmitter
have lost auto-r
ecognition and must be
reconnected.
(The receiver and transmitter have auto-
recognition capability and have been preset to the same
channel during production. Normally you should not
need to reset them during installation.) 
T
o
 re-establish
the connection, press the connect button on the receiver
and the connect button on the bottom of the keyboard at
the same time. 
The receiver's blue LED should flash quickly
, indicating the recognition procedure was
successful. Next, press the 
W
indows key and the keyboard should be fully functional. Repeat the
recognition process until the receiver and keyboard are linked.
If after
extended use the keyboard begins to r
espond slowly
, r
e
place the batteries.
Alkaline, Li Ion or
rechar
geable batteries are recommended replacements and should provide many hours of use.
Hot K
e
ys Guide
Y
our IN3010KB 
W
ireless Multimedia Flexible Keyboard comes preset with the following multimedia hot keys:
PS/2 P
o
rt
PS/2 Adapter
USB Connector
K
e
yboard
2.
3.
CONNECT
Button
Indicator
200711031 93-2705 Noteables keyboard OM.qxd  11/7/2007  4:46 PM  Page 2