Fujifilm S3000 Mode D'Emploi
0
2
0
3
0
1
21
1
0
1
0
3
0
2
SELECTING THE LANGUAGE
1
1Press the “MENU/OK” button.
2Press “d” or “c” to select “
2Press “d” or “c” to select “
g
OPTION” and
then press “a” or “b” to select “SET–UP”.
3Press the “MENU/OK” button.
2
1Press “a” or “b” to select “LANGUAGE”.
2Press “c” to select “ENGLISH”, “FRANCAIS”,
2Press “c” to select “ENGLISH”, “FRANCAIS”,
“DEUTSCH”, “ESPAÑOL” or “
”. You can
cycle through the language settings by
pressing “c”.
pressing “c”.
3Press the “MENU/OK” button.
0
3
0
2
0
1
ＳＥＴ−ＵＰ
ＳＥＴ−ＵＰ
ＯＰＴＩＯＮ
ＯＰＴＩＯＮ
ＬＣＤ
ＬＣＤ
ＳＥＴ−ＵＰ
ＳＥＴ−ＵＰ
２／２
２／２
ＳＥＴ
ＳＥＴ
ＣＡＮＣＥＬ
ＣＡＮＣＥＬ
ＯＫ
ＯＫ
ＢＡＣＫ
ＢＡＣＫ
ＵＳＢ ＭＯＤＥ
ＵＳＢ ＭＯＤＥ
ＲＥＳＥＴ
ＲＥＳＥＴ
ＯＫ
ＯＫ
ＬＡＮＧＵＡＧＥ
ＬＡＮＧＵＡＧＥ
ＥＮＧＬＩＳＨ
ＥＮＧＬＩＳＨ
ＮＴＳＣ
ＮＴＳＣ
ＶＩＤＥＯ ＳＹＳＴＥＭ
ＶＩＤＥＯ ＳＹＳＴＥＭ
●
!
The screens in this manual are shown in English.
●
!
See P.78 for more information on the “
g
” OPTION
menu.
20
1 Press “
d
” or “
c
” to select the date order.
2 Press “
a
” or “
b
” to set the date order. Refer
to the table below for details of the settings.
3
Always press the “MENU/OK” button after the
settings are completed.
◆
Power Save Function
◆
If the camera is not used for 2 minutes, this
function automatically switches it off.
When this function is enabled, the screen
switches off to conserve battery power if the
camera is not used in any way for 30 seconds
(See P.79 for details). To switch the camera
back on, turn the Power switch to “OFF” briefly
and then back to “q”.
function automatically switches it off.
When this function is enabled, the screen
switches off to conserve battery power if the
camera is not used in any way for 30 seconds
(See P.79 for details). To switch the camera
back on, turn the Power switch to “OFF” briefly
and then back to “q”.
Switch the camera on and check that no battery
level warning (X or C) is displayed on the
LCD monitor. If no icon is displayed, there is
ample charge left in the batteries.
level warning (X or C) is displayed on the
LCD monitor. If no icon is displayed, there is
ample charge left in the batteries.
i
X Lit red:
Batteries charge low. Replace or recharge the
batteries as they will run out shortly.
Batteries charge low. Replace or recharge the
batteries as they will run out shortly.
i
C Blinking red:
The batteries are exhausted. The display will
shortly go blank and the camera will stop
working. Replace or recharge the batteries.
The batteries are exhausted. The display will
shortly go blank and the camera will stop
working. Replace or recharge the batteries.
●
!
Do not reuse batteries that have no remaining
charge (C blinking red) as this can result in faults
such as the camera switching off without retracting
the lens.
charge (C blinking red) as this can result in faults
such as the camera switching off without retracting
the lens.
●
!
The above estimates are for the Still image modes.
In Playback mode, the transition from “X” to “C”
may take less time.
In Playback mode, the transition from “X” to “C”
may take less time.
CHECKING THE REMAINING
BATTERIES CHARGE
BATTERIES CHARGE
CHANGING THE DATE ORDER
Date order
Explanation
YYYY.MM.DD
Displays the date in the “year.month. day” format.
MM/DD/YYYY
Displays the date in the “month/day/ year” format.
DD.MM.YYYY
Displays the date in the “day.month. year” format.
９ １８ ２００３
９ １８ ２００３
８ ： ５９ ＡＭ
８ ： ５９ ＡＭ
ＭＭ ＤＤ ＹＹＹＹ
ＭＭ ＤＤ ＹＹＹＹ
ＤＡＴＥ／ＴＩＭＥ
ＤＡＴＥ／ＴＩＭＥ
ＳＥＴ
ＳＥＴ
ＣＡＮＣＥＬ
ＣＡＮＣＥＬ
ＯＫ
ＯＫ
ＢＡＣＫ
ＢＡＣＫ