Fujifilm S3000 Mode D'Emploi

ＳＥＴ−ＵＰ

ＳＥＴ−ＵＰ

２／２

２／２

ＳＥＴ

ＳＥＴ

ＣＡＮＣＥＬ

ＣＡＮＣＥＬ

ＯＫ

ＯＫ

ＢＡＣＫ

ＢＡＣＫ

ＵＳＢ ＭＯＤＥ

ＵＳＢ ＭＯＤＥ

ＲＥＳＥＴ

ＲＥＳＥＴ

ＯＫ

ＯＫ

ＬＡＮＧＵＡＧＥ

ＬＡＮＧＵＡＧＥ

ＥＮＧＬＩＳＨ

ＥＮＧＬＩＳＨ

ＮＴＳＣ

ＮＴＳＣ

ＶＩＤＥＯ ＳＹＳＴＥＭ

ＶＩＤＥＯ ＳＹＳＴＥＭ

1 Switch your PC on.
2 Connect the camera to the PC using the USB cable

(included).

3 Switch the camera on.

●

Take care to ensure that the USB cable (included) is connected
the correct way around and that the plugs are pushed fully into
the sockets.

h When the camera and computer are exchanging

data, the self-timer lamp blinks red and the indicator
lamp blinks alternately green and orange.

h “•” appears on the screen.
h Power Save and Auto Power Off are disabled during

USB connection.

●

Before replacing the xD-Picture Card, always disconnect the
camera from the PC using the procedure on P.102.

●

Do not disconnect the USB cable when the camera is
communicating with the PC. See P.102 for information on the
disconnection procedure.

Continued

For more information on using the software, refer to “How to use
FinePixViewer” in the HELP menu which was installed from the CD-
ROM.

Switch between “(” and “qPC” in the camera’s SET-UP screen.

1 Insert an xD-Picture Card containing your shots

into the camera.

2 Slide the Power switch to the side to turn the

camera on.

3 Set the “USB MODE” setting in the “SET–UP”

menu to “(” (

➡P.77, 78).

4 Slide the Power switch to the side to turn the

camera off.

●

Use the AC Power Adapter AC-5VH/AC-5VHS (sold separately)
for the connection(

➡P.109). Loss of power during communication

may damage the files on the xD-Picture Card.

0

1

0

3

0

2