Fujifilm 6900 Zoom Manuel D’Utilisation

●

Do not remove the SmartMedia or disconnect the
USB cable without following the removal/
disconnection procedure described above.

Always take the following steps before
disconnecting the camera from your computer:

➀

Check that the indicator lamp is green (the
camera is not exchanging data with the
computer).

➁

Select the correct procedure below for the
operating system used on your computer.
Then proceed to step 

➂

on the right side of

this page.

●

Windows 98
Check that the indicator lamp is green.

●

Windows Me/2000 Professional
Exit  “FinePixViewer”. Then click the Eject
icon in the taskbar and eject the media.
Check that the “REMOVE OK” message is
displayed.

●

Macintosh
Quit  “FinePixViewer”. Drag the “Removable
Drive” icon to the Trash and check that
“REMOVE OK” is displayed on the camera’s
screen.

➂

Switch the camera off.

➃

Disconnect the special USB cable from the
camera.

Load a SmartMedia that has available space and
connect as a “CARD READER (DSC)”. (

➡P.104)

➀

Use the downloaded “FinePix6900Customizer”
software to specify the functions to be added. 

➁

Click the “OK” button to write the data to the
SmartMedia.

Disconnect the camera from the computer and
unplug the special USB cable (

➡P.106). 

➀

When you switch the camera on, the
customized screen appears.

➁

Press “

c

” to check the details.

➂

Press the “MENU/OK” button to proceed.

Do not switch the SmartMedia during the
customization procedure.

●

If you selected “NO”, the customized screen appears
the next time you switch the camera on.

●

➂

●

➁

●

➀

●

➂

●

➃

✽The figure shows

the Macintosh
screen display.