Fujifilm 6900 Zoom Manuel D’Utilisation

N AF

Remove the protection.

• If the image is too dark, take the picture at a

distance of around 2 m (6.6 ft.) from the subject.

• Use AF lock to take the picture.

A protected frame was erased.

The AF (auto focus) cannot work
effectively.

The shot can be taken, but the exposure will
not be correct.

Outside the AE continuous
range.

Use flash photography. However, a tripod
should be used for some scenes and modes.

There is a strong likelihood of
camera shake because the
shutter speed is slow.

Camera malfunction or fault.

When you erase the image, the DPOF
settings for that image are deleted at the
same time.

Press the MENU/OK button to create a new
DPOF file and specify all the DPOF settings
again.

• Switch the camera on again, taking care not

to touch the lens.

• Turn the camera off and on again a few

times. If this does not resolve the problem,
contact an authorized FUJIFILM service
center.

Prints were specified for more
than 1000 frames in the DPOF
frame settings.

The maximum number of frames for which
prints can be specified on the same
SmartMedia is 999. Print specifications can
be set for a maximum of 999 frames on the
same SmartMedia.

There is a print order specified
for image you attempted to
erase.

The DPOF file contains an error.
Alternatively, the DPOF file was
set up on a different device.

(Lit red)

¡

å

ß

∂

•

π

ø

Switch the Frame NO. Memory function off and
use a formatted SmartMedia to take the picture.

The frame number has reached
999-9999.

• The data could not be recorded

due to a SmartMedia error or a
connection error between the
SmartMedia and camera.

• The photographed image cannot

be recorded as it is too large to
fit in the available space on the
SmartMedia.

• Re-insert the SmartMedia or switch the

camera off and then on again. 

• Use a new SmartMedia.

¶

·