Itronix fex21 Brochure
d)
Screen overlay installation has negligible impact to overall display brightness/viewability and can provide enhanced screen
clarity while maximizing useful life of the screen surface.
clarity while maximizing useful life of the screen surface.
e)
Screen Overlays are available as Field Kits. Contact your Support Representative for order requests.
4.
Use of the Touch Screen Stylus (If Applicable): The Styli included with GoBook® Notebook and Tablet Computers have been
qualified for extended use with the integrated Touch Screen. Foreign objects such as ball point pens or hand tools should never be
used for Touch Screen input as they will cause damage to the screen surface.
a)
qualified for extended use with the integrated Touch Screen. Foreign objects such as ball point pens or hand tools should never be
used for Touch Screen input as they will cause damage to the screen surface.
a)
As an alternative to the Stylus, a clean finger tip can be used for Touch Screen input with out damaging the screen surface.
Fingertip use may introduce contaminants to the Touch Screen surface and increase periodic screen cleaning requirements.
Fingertip use may introduce contaminants to the Touch Screen surface and increase periodic screen cleaning requirements.
b)
Replacement Styli w/tethers are available as Field Kits. Contact your Support Representative for order requests.
5.
Keyboard Overlay Use: For environments with high contaminant potential where the GoBook’s keyboard will routinely be
exposed to build up of dirt, grease, etc., use of a keyboard overlay is recommended.
a)
exposed to build up of dirt, grease, etc., use of a keyboard overlay is recommended.
a)
Keyboard Overlays are available as Field Kits. Contact your Support Representative for order requests.
6.
Use of the GoBook® in a vehicle environment (Docked):
a)
a)
Never attempt to operate the GoBook® or read the display while driving. This can be extremely distracting and may increase
potential for accident conditions.
potential for accident conditions.
b)
Always close the display lid (if equipped) while the vehicle is in motion. During travel the vehicle may present an increased
level of vibration to the mounting solution. This added vibration can be amplified up through the display when in an upright/
opened position and can lead to accelerated hinge wear.
level of vibration to the mounting solution. This added vibration can be amplified up through the display when in an upright/
opened position and can lead to accelerated hinge wear.
Note: Available Field Kits and can be ordered through the iCare Servenet Portal - https://ebusiness.itronix.com/servenet_us/,
or by contacting the Client Care Center (CCC) at 800-638-9270, option 2. Access to the iCare Servenet Portal requires a
Username and Password. Portal access will be setup upon request.
or by contacting the Client Care Center (CCC) at 800-638-9270, option 2. Access to the iCare Servenet Portal requires a
Username and Password. Portal access will be setup upon request.
7.
Ensure that the computer is operated and stored within its specified temperature range.
a)
a)
Operating Temperature -4° F to 140° F (-20° C to 60° C)
b)
Storage Temperature -67° F to 167° F (-55° C to 75° C)
8.
Conserve battery charge when possible to maximize battery life during daily use.
a)
a)
Partial discharge/charge cycles are preferred compared to draining the battery completely and recharging.
9.
Avoid prolonged exposure to temperature extremes.
a)
a)
Cold temperature extremes may result in reduced available energy from the battery. This energy is recoverable as the battery
warms to a nominal temperature of around 68° F (20°C).
warms to a nominal temperature of around 68° F (20°C).
b)
Prolonged exposure to high temperatures can result in permanent reduction in available energy from the battery.
c)
Battery charging is disabled below 32° F (0°C) and above 113° F (45°C) to protect lithium ion cells in the battery.
10. Exit all applications and shutdown or reboot at the end of each work day. If the computer is left powered overnight, ensure that all
applications are closed and perform a restart prior to beginning daily operations.
a)
a)
This practice ensures that all applications and system resources used by those applications are reinitialized each work day.
b)
Unless an application is specifically designed for 24/7 operation, a daily practice of restarting (resetting) an application can
minimize the potential for a wide variety of operational anomalies often perceived by the user as a hardware failure.
minimize the potential for a wide variety of operational anomalies often perceived by the user as a hardware failure.
Power Management
1.
The use of Windows Power Management or GoBook® Power Saver (if equipped) applications is recommended to provide
maximum battery run time and prolong battery service life. Default settings allow the GoBook® to enter a Standby/Suspend state
after a set period of inactivity. Extending or Disabling the Standby/Suspend timeout period will increase power consumption and
reduce operational time on battery power.
a)
maximum battery run time and prolong battery service life. Default settings allow the GoBook® to enter a Standby/Suspend state
after a set period of inactivity. Extending or Disabling the Standby/Suspend timeout period will increase power consumption and
reduce operational time on battery power.
a)
The GoBook® will resume/wake from Standby with keyboard (Notebook) or cursor (Tablet) activity.
2.
Display backlight power settings: Default settings allow the GoBook® to power off the display backlight after a set period of
inactivity. Extending or Disabling the display backlight timeout period will increase power consumption and reduce operational
time on battery power.
a)
inactivity. Extending or Disabling the display backlight timeout period will increase power consumption and reduce operational
time on battery power.
a)
The Display Backlight will resume power with keyboard or cursor activity.
97-0131-001 16 May 2007 P.2
(more)