Fujifilm S7000 Manuel D’Utilisation

Page de 61
117
116
Explanation of Terms
AF/AE Lock:
On the FinePix S7000, pressing the Shutter button down half way locks the focus and exposure settings (AF and AE lock). If
you want to focus on a subject that is not centered in the frame or change the picture composition after the exposure is set,
you can obtain good results by changing the composition after the AF and AE settings are locked.
Auto power save function:
If the camera is not used in any way for 30 seconds, this function turns features such as the LCD monitor off (Sleep mode) to
prevent battery depletion and the waste of power when the AC power adapter is connected. If the camera is then left unused
for a further period, the Auto power save function turns the camera off. This period can be set to 2 minutes or 5 minutes on
this camera.
h The Auto power off function does not operate in PC mode, during automatic playback, or if it is disabled during setup.
Deactivated batteries:
Leaving an Ni-MH battery unused in storage for a long period may cause a rise in the level of substances that inhibit current
flow inside the battery and result in a dormant battery. A battery in this state is referred to as deactivated.
Because current flow is inhibited in a deactivated Ni-MH battery, the battery's original level of performance cannot be
achieved.
DPOF:
Digital Print Order Format
DPOF is a format used for recording information on a storage media (image memory card, etc.) that allows you to specify
which of the frames shot using a digital camera are to be printed and how many prints are made of each image.
EV:
A number that denotes Exposure Value. The EV is determined by the brightness of the subject and sensitivity (speed) of the
film or CCD. The number is larger for bright subjects and smaller for dark subjects. As the brightness of the subject changes,
a digital camera maintains the amount of light hitting the CCD at a constant level by adjusting the aperture and shutter
speed.
When the amount of light striking the CCD doubles, the EV increases by 1. Likewise, when the light is halved, the EV
decreases by 1.
Frame rate (fps):
The frame rate refers to the number of images (frames) that are photographed or played back per second. For example,
when 10 frames are continuously photographed in a 1-second interval, the frame rate is expressed as 10 fps.
For reference, TV images are displayed at 30 fps.
JPEG:
Joint Photographics Experts Group
A file format used for compressing and saving color images. The higher the compression rate, the greater the loss of quality
in the decompressed (restored) image.
Memory effect:
If an Ni-MH battery is repeatedly charged without first being fully discharged, its performance may drop below its original
level. This is referred to as the “memory effect”.
Motion JPEG:
A type of AVI (Audio Video Interleave) file format that handles images and sound as a single file. Images in the file are
recorded in JPEG format. Motion JPEG can be played back by QuickTime 3.0 or later.
PC Card:
A generic term for cards that meet the PC Card Standard.
PC Card Standard:
A standard for PC cards determined by the PCMCIA.
PCMCIA:
Personal Computer Memory Card International Association (US).
Smear:
A phenomenon specific to CCDs whereby white streaks appear on the image when there is a very strong light source, such
as the sun or reflected sunlight, in the photography screen.
WAVE:
A standard format used on Windows systems for saving audio data. WAVE files have the “.WAV” file extension and the data
can be saved in either compressed or uncompressed format. Uncompressed recording is used on this camera.
WAVE files can be played back on a personal computer using the following software:
Windows : MediaPlayer
Macintosh: QuickTime Player  
✽ QuickTime 3.0 or later
White Balance:
Whatever the kind of the light, the human eye adapts to it so that a white object still looks white. On the other hand, devices
such as digital cameras see a white subject as white by first adjusting the color balance to suit the color of the ambient light
around the subject. This adjustment is called matching the white balance. A function that automatically matches the white
balance is called an Automatic White Balance function.
Exif Print Format is a newly revised digital camera file format that contains a variety of shooting information for optimal
printing.
Specifications
h These specifications are subject to change without notice.
FUJIFILM shall not be held liable for damages resulting
from errors in this Owner’s Manual.
h The LCD monitor on your digital camera is manufactured
using advanced high-precision technology. Even so, small
bright points and anomalous colors (particularly around
text) may appear on the monitor. These are normal display
characteristics and do not indicate a fault with the monitor.
This phenomenon will not appear on the recorded image.
h The operation error may be caused in a digital camera by
the strong radio interference (i. e. electric fields, static
electricity, line noise, etc.).
h Due to the nature of the lens, the edges of photographed
images may appear distorted. This is normal and does not
indicate a fault.
■ Standard recording Times for Media
✽ The number of available frames, recording time or file size varies slightly depending on the subjects photographed. Note
also that the difference between standard number of frames and the actual number of frames is greater for media with
higher capacities.
Power supply
Use one of the following:
i 4
× AA-size alkaline batteries
i 4
× AA-size Ni-MH (Nickel-Metal Hydride) batteries (sold separately)
i AC Power Adapter AC-5VH/AC-5VHS (sold separately)
Conditions for use
Temperature: 0°C to +40°C (+32°F to +104°F)
80% humidity or less (no condensation)
Guide to the number of 
available frames for battery 
operation
Camera dimensions
121.0 mm 
× 81.5 mm × 97.0 mm/4.8 in. × 3.2 in. × 3.8 in.
(W 
× H × D)
(not including accessories and attachments)
Camera mass (weight)
500 g/17.6 oz. 
(not including accessories, batteries, xD-Picture Card and Microdrive)
Weight for photography
Approx. 600 g/21.2 oz. (including batteries and xD-Picture Card)
Accessories
See P.7
Optional Accessories
See P.106
Power Supply and Others
The number of available frames for battery operation given here is a guide to the
number of consecutive shots that can be taken under FUJIFILM test conditions.
i Batteries used: alkaline batteries bundled with the camera
fully charged Ni-MH batteries
i Shooting conditions: Measured at normal temperature with 50% flash use
i Note: Because the number of available frames that can be taken varies depending on
the capacities of alkaline batteries and the amount of charge in Ni-MH batteries,
the figures given here for the number of frames that can be taken using
batteries are not guaranteed. At low temperatures, fewer pictures can be taken
when the camera is running on batteries.
Alkaline batteries
Ni-MH batteries 
HR-3UF (2100)
xD-Picture Card
Battery Type
Media type
Using LCD monitor
Using EVF
Approx. 210 frames
Approx. 220 frames
Approx. 340 frames
Approx. 350 frames
Microdrive
Using LCD monitor
Using EVF
Approx. 200 frames
Approx. 210 frames
Approx. 310 frames
Approx. 320 frames
■ Standard number of frames per Media
Quality
Q
F
Q
N
Number of recorded pixels
4048 
× 3040
Image Data Size
4.9 MB
DPC-16 (16 MB)
3
2.5 MB
6
5
2848 
× 2136
1.5 MB
10
3
2016 
× 1512
760 KB
20
6
12
20
41
12
26
42
82
26
52
84
166
52
105
169
332
2
1600 
× 1200
630 KB
25
50
101
204
409
1
1280 
× 960
470 KB
33
68
137
275
550
l
13 MB
1
2
4
9
19
DPC-32 (32 MB)
DPC-64 (64 MB)
DPC-128 (128 MB)
DPC-256 (256 MB)
105
211
339
665
818
1101
39
DPC-512 (512 MB)
72
144
232
459
559
752
27
Microdrive 340 MB
217
432
698
1368
1642
2190
81
Microdrive 1 GB
4048 
× 3040
Quality mode
Number of recorded pixels
DPC-16 (16 MB)
% (30 fps)
640 
× 480
13 sec.
27 sec.
55 sec.
111 sec.
223 sec.
$ (30 fps)
26 sec.
54 sec.
109 sec.
219 sec.
7.3 min.
DPC-32 (32 MB)
DPC-64 (64 MB)
DPC-128 (128 MB)
DPC-256 (256 MB)
7.4 min.
14.6 min.
DPC-512 (512 MB)
5.0 min.
10.0 min.
Microdrive 340 MB
15.3 min.
30.1 min.
Microdrive 1 GB
320 
× 240