Fujifilm S3100 Manuel Du Propriétaire
21
Using
the
Camera
2
20
Bebeep
5
●
!
Check that the lens is clean. If it is dirty, clean the lens as
informed on P.85.
informed on P.85.
Hold the camera so that your fingers or the strap do
not cover the lens, flash or flash control sensor. If
the lens, flash or flash control sensor is obscured,
the brightness (exposure) of your shot may be
incorrect.
not cover the lens, flash or flash control sensor. If
the lens, flash or flash control sensor is obscured,
the brightness (exposure) of your shot may be
incorrect.
6
Press “T (a)” Tele zoom button to zoom in. Press
“W (b)” Wide zoom button to zoom out. A zoom
bar appears on the screen.
“W (b)” Wide zoom button to zoom out. A zoom
bar appears on the screen.
h Optical zoom focal length
(35 mm camera equivalent)
Approx. 39 mm-234 mm
Max. zoom scale: 6
Approx. 39 mm-234 mm
Max. zoom scale: 6
×
●
!
Zooming pauses briefly when the camera changes between
optical zoom and digital zoom (
optical zoom and digital zoom (
➡P.25). Press the same zoom
button again to change zoom modes.
１６
１６
Ｎ
Zoom bar
Press the shutter button down halfway. When a
short double-beep is heard, the camera focuses on
your subject. The AF frame on the screen becomes
smaller. The indicator lamp (green) changes from
blinking to lit.
short double-beep is heard, the camera focuses on
your subject. The AF frame on the screen becomes
smaller. The indicator lamp (green) changes from
blinking to lit.
●
!
If the camera does not emit a short double-beep and “
{
”
appears on the screen, the camera cannot focus.
●
!
Pressing the shutter button down halfway freezes the image
on the screen briefly. This is not the recorded image.
on the screen briefly. This is not the recorded image.
●
!
If “
{
” appears on the screen (e.g. the shot is too dark for
the camera to focus), try standing about 2 m (6.6 ft.) from the
subject to take the picture.
subject to take the picture.
8
Use the screen to frame the shot so that the
subject fills the entire AF (Autofocus) frame.
subject fills the entire AF (Autofocus) frame.
●
!
When the subject is not in the AF frame, use AF/AE lock to
take the picture (
take the picture (
➡P.24).
●
!
The image shown on the screen before the picture is taken
may differ in brightness, color, etc. from the image actually
recorded. Play back the recorded image to check it (
may differ in brightness, color, etc. from the image actually
recorded. Play back the recorded image to check it (
➡P.26).
7
１６
１６
Ｎ
AF frame
1
1 Set the Power switch to “
q
”.
2 Set the Mode dial to “
B
”.
h Focal range
Approx. 80 cm (2.6 ft.) to infinity
●
!
Use Macro mode for subjects closer than 80 cm (2.6 ft.)
(
(
➡P.32).
●
!
When “
7
”, “
-
”, “
q
”
or “
=
” appears, see P.89.
0
1
0
2
2
Press the “EVF/LCD” button to alternate the display
between the viewfinder (EVF) and the LCD
monitor. Press the “EVF/LCD” button to select the
viewfinder (EVF).
between the viewfinder (EVF) and the LCD
monitor. Press the “EVF/LCD” button to select the
viewfinder (EVF).
EVF
LCD
3
4
●
!
When the flash pops up, the image may disappear and go
dark briefly due to flash charging. The indicator lamp blinks
orange during charging.
dark briefly due to flash charging. The indicator lamp blinks
orange during charging.
●
!
If the flash is used in dusty conditions or when it is snowing,
white dots may appear in the image. This is due to the flash
reflecting off the dust particles or snowflakes. Use
Suppressed flash mode to fix the problem.
white dots may appear in the image. This is due to the flash
reflecting off the dust particles or snowflakes. Use
Suppressed flash mode to fix the problem.
Press the Flash pop-up button to pop up the flash.
Brace your elbows against your sides and hold the
camera with both hands. Position your right thumb
so that it is handy for using the zoom.
camera with both hands. Position your right thumb
so that it is handy for using the zoom.
●
!
Moving the camera while shooting gives a blurred picture
(camera shake). Use a tripod to avoid camera shake,
particularly for shots in the dark when the selected flash
mode is Suppressed flash.
(camera shake). Use a tripod to avoid camera shake,
particularly for shots in the dark when the selected flash
mode is Suppressed flash.
●
!
There may be some uneven brightness at the lower edge of
the screen. This is normal and does not affect the image.
the screen. This is normal and does not affect the image.
TAKING PICTURES (B AUTO MODE)
PHOTOGRAPHY MODE
The EVF/LCD selection is retained even when the
camera is off or the Mode dial setting is changed.
camera is off or the Mode dial setting is changed.
Before the flash fires, “
∑
” appears on the screen.
Continued