Fujifilm S3100 Manuel Du Propriétaire

77

76

h When the camera and PC are exchanging data,

the self-timer lamp blinks and the indicator lamp
blinks alternately green and orange.

h “

g

” appears on the screen.

h Power save and Auto power off are disabled

during USB connection.

●

Before replacing the xD-Picture Card, always disconnect the
camera from the PC using the procedure on P.79.

●

Do not disconnect the USB cable when the camera is
communicating with the PC. See P.79 for information on the
disconnection procedure.

1 Insert an xD-Picture Card into the camera.
2 Set the Power switch to turn the camera on.
3 Select “

¶

” in “USB MODE” in the “SET-UP”

menu (

➡P.60).

4 Set the Power switch to turn the camera off.

1 Turn your PC on.
2 Connect the camera to the PC using the USB

cable (included).

3 Turn the camera on.

0

1

0

3

0

2

0

4

●

Make sure that the USB cable (included) is connected
correctly and pushed in.

●

Use the AC Power Adapter AC-5VH/AC-5VHS (sold separately)
for the connection (

➡P.83). If shutting off power supply during

communication, the files on the xD-Picture Card may be
damaged.

Continued

ＳＥＴ

ＳＥＴ

ＣＡＮＣＥＬ

ＣＡＮＣＥＬ

ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ

ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ

：ＳＥＴ

：ＳＥＴ
：ＣＯＮＴ．

：ＣＯＮＴ．

ＳＥＴ−ＵＰ

ＳＥＴ−ＵＰ

：ＳＥＴ

：ＳＥＴ

ＤＡＴＥ／ＴＩＭＥ

ＤＡＴＥ／ＴＩＭＥ

ＦＲＡＭＥ ＮＯ．

ＦＲＡＭＥ ＮＯ．   

  

１

３

ＵＳＢ ＭＯＤＥ

ＵＳＢ ＭＯＤＥ

２

The “Connecting to a PC” section explains how to connect the camera to your PC using the USB
cable (included) and describes the functions you can use once the camera and PC are connected.

If the power cuts out during data transmission, the data will not be transmitted correctly. Always use the
AC power adapter when connecting the camera to a PC.

Refer to Section 5 the first time you connect the camera to your PC.
Install the software first. Do not connect the camera with the PC before
installing all the software.

This mode provides a simple way to read images from an xD-Picture Card and store images onto
an xD-Picture Card (

➡P.77).

CD-ROM

(Software for FinePix AX)

¶

This function allows you to conduct videoconferencing sessions between PCs connected to the
Internet.

●

The WEB Camera function can only be used on Windows XP SP1.

●

Microsoft Windows Messenger 5.0 or later is required to use the WEB Camera function.
For downloading and using this software, please refer to the below explanation for “Using video chat with Windows
Messenger” No.i. Please download it from the Messenger web site.

●

Images are not output to a TV.
When using Video Chat with the WEB Camera function, Windows XP SP1 is required also for your partner’s OS.

Change between “

¶

” and “

q

WEB” in the camera’s SET-UP screen.

q WEB

◆

◆

q Plug the AC power adapter connector into the “DC IN 5V” socket on the camera and then plug the

adapter into the power outlet.

w Turn the camera on in Photography mode (

➡P.13, 20).

e Set the “USB MODE” setting in the “SET-UP” menu to “

q

WEB” (

➡P.59).

r Turn the camera off (

➡P.13).

t Turn your PC on.
y Use the USB cable to connect the camera to your PC.
u Turn the camera on in Photography mode (

➡P.13, 20).

i Using Video Chat with Windows Messenger, refer to “How to use FinePixViewer” in the HELP menu

which was installed from the CD-ROM.

●

Take care to make sure that the USB cable is connected the correct way around and that the plugs are pushed fully
into the connection sockets.

h “

h

” appears on the LCD monitor.

h Power save and Auto power off are disabled during USB connection.

q Quit all applications (FinePixViewer etc.) that are using the camera.
w Turn the camera off (

➡P.13).

e Unplug the USB cable from the camera.