Fujifilm S3100 Manuel Du Propriétaire
13
Getting
Ready
1
12
DATE/TIME
DATE/TIME
2004
2004 1
1
.
. 1
1
12 : 00 AM
12 : 00 AM
YYY
YYYY.MM.DD
DD
SET
SET
CANCEL
CANCEL
TURNING ON AND OFF / SETTING THE DATE AND TIME
2
When first using the camera, the date and time are
cleared. Press the “MENU/OK” button to set the
date and time.
cleared. Press the “MENU/OK” button to set the
date and time.
●
!
If the message (see figure at left) does not appear, refer to
“Correcting the date and time” (
“Correcting the date and time” (
➡P.14) and check and correct
the date and time settings.
●
!
The message also appears when the batteries have been
removed and the camera has been left for a long period.
removed and the camera has been left for a long period.
●
!
To set the date and time later, press the “DISP/BACK” button.
●
!
If you do not set the date and time, this message will appear
each time you turn the camera on.
each time you turn the camera on.
3
4
1 Press “d” or “c” to select Year, Month, Day,
Hour or Minute.
2 Press “a” or “b” to correct the setting.
Once you have set the date and time, press the
“MENU/OK” button. Pressing the “MENU/OK”
button changes the camera to Photography or
Playback mode.
“MENU/OK” button. Pressing the “MENU/OK”
button changes the camera to Photography or
Playback mode.
●
!
Holding down “a” or “b” changes the numbers continuously.
●
!
When the time displayed passes “12:00”, the AM/PM setting
changes.
changes.
●
!
At the time of purchase and after leaving the camera for a
long period with the batteries removed, settings such as the
date and time are cleared. Once the AC power adapter has
been connected or the batteries have been installed for 2
hours or more, the camera settings will be retained for
roughly 6 hours even if both sources of power are removed.
long period with the batteries removed, settings such as the
date and time are cleared. Once the AC power adapter has
been connected or the batteries have been installed for 2
hours or more, the camera settings will be retained for
roughly 6 hours even if both sources of power are removed.
0
1
0
2
1
To turn the camera on, set the Power switch to “
q
”
or “
w
”. When turning the camera on, the indicator
lamp lights green.
To turn the camera off, set the Power switch to
“OFF”.
To turn the camera off, set the Power switch to
“OFF”.
DATE/TIME
DATE/TIME
NOT SET
NOT SET
NOT SET
SET
SET
NO
NO
2004 .
2004 . 7 .
. 23
23
12 : 00 AM
12 : 00 AM
YYY
YYYY.
Y.MM.DD
DD
DATE/TIME
DATE/TIME
SET
SET
CANCEL
CANCEL
1
Check that the camera is turned off (indicator lamp
is off) before opening the slot cover.
is off) before opening the slot cover.
●
!
If the xD-Picture Card is oriented incorrectly, it will not go all
the way into the slot. Do not apply force when inserting an
xD-Picture Card.
the way into the slot. Do not apply force when inserting an
xD-Picture Card.
●
!
If opening the slot cover while the camera is still on, the
camera will turn off.
camera will turn off.
2
Align the indicators on the xD-Picture Card slot and
xD-Picture Card and then push the card firmly all
the way into the slot.
xD-Picture Card and then push the card firmly all
the way into the slot.
3
Close the slot cover.
◆
How to replace the xD-Picture Card
◆
Push the xD-Picture Card into the slot and then
slowly remove your finger. The lock is released and
the xD-Picture Card is pushed out.
slowly remove your finger. The lock is released and
the xD-Picture Card is pushed out.
INSERTING THE MEDIA
The lens moves when the camera is in “
q
”
Photography mode. Take care not to obstruct the
lens.
Obstructing the lens will cause damage and
“
lens.
Obstructing the lens will cause damage and
“
8
” or “
9
” will appear.
Take care also not to get fingerprints on the
camera lens as this will result in impaired image
quality in your shots.
camera lens as this will result in impaired image
quality in your shots.