Fujifilm xp200 Manuel D’Utilisation
xiv
Product Features and Precautions for Use
■
■ After Use
After Use
Perform the following steps after using the camera underwater or in locations where foreign
matter might adhere to the camera body.
matter might adhere to the camera body.
1
Securely close the battery-chamber cover and rinse the camera
under the tap or leave it in a basin of fresh water for about ten
minutes.
minutes.
2
Remove water from the camera with a soft, dry cloth and leave it to dry in a well-ventilated
location in the shade.
3
After confirming that the camera has dried and is free of water droplets, open the battery-
chamber cover and use a soft, dry cloth to remove any water, dust, or other foreign matter
from the battery chamber.
from the battery chamber.
Q Remove any foreign matter from the water-resistant seal and adjacent surfaces. Foreign
matter could damage the seal, lowering water resistance.
Q Liquid soaps, detergents, alcohol, and other cleansers may affect water resistance and should
never be used.
Q After use, remove water droplets and foreign matter with a dry cloth, firmly latch the battery-
chamber cover, and soak the camera in fresh water for about ten minutes. Dry the camera
thoroughly after removing it from the water.
thoroughly after removing it from the water.