Hasselblad 343 Manuel D’Utilisation
Front Panel
A
Feed Table:
place original holders here for scanning. The table can
be folded up to keep dust from entering the scanner and to keep it
out of the way.
B
Light Area:
for viewing originals. The grid helps you to align the
originals.
C
Indicator light:
The indicator can light up in 3 different colors
indicating the following:
Green (Power/Ready)
Green (Power/Ready)
- remains lit when ready to scan. Flashes
when first installed to indicate that firmware must be loaded (it will
be loaded automatically when you run FlexColor).
Yellow (Motor Drive)
Yellow (Motor Drive)
- when drum is repositioning.
Red (Scanning)
- when scanning. Do not touch the scanner while
the indicator is red. If the light is flashing when not scanning, then
an error has occurred - please contact your Flextight dealer for
assistance.
D
Power Switch:
press to turn the unit on/off.
E
Original Holder Clasp:
all original holders slide into a slot here and
are held in place by magnets.
User's Guide - Flextight 343
Hardware Reference - Flextight 343
7
Front Panel
English
B
A
C
D
E
Figure 1: Front panel features of Flextight 343