Roland e-09 Manuel Du Propriétaire
![Roland](https://files.manualsbrain.com/attachments/0f4c16ad543d01443d705a6df0a922f055403287/common/fit/150/50/3f2e1fe174f8814c1395beda0db29618b95ef95d02ed697f721709eb4377/brand_logo.png)
21
Song Functions
Using a Foot Switch to Punch In/Out
You can use a separately available foot switch (Roland DP series unit
or BOSS FS-5U) to start or stop recording. This lets you use both
hands for your performance; for example, allowing you to use your
left hand to operate the pitch bend/modulation lever while you use
your right hand to play the melody.
or BOSS FS-5U) to start or stop recording. This lets you use both
hands for your performance; for example, allowing you to use your
left hand to operate the pitch bend/modulation lever while you use
your right hand to play the melody.
1.
Connect the foot switch to the rear panel FOOT SWITCH
jack.
jack.
2.
Press [FUNCTION] so it’s lit.
3.
Use FAMILY [
][
4.
Use SELECT [
][
5.
Use TEMPO [
(-)][
(+)] to select “PunchI/O.”
6.
Continue with step 1 and those that follow under “Punch-In/
Out Recording Mode.”
Out Recording Mode.”
In steps 6 and 8 of “Punch-In/Out Recording Mode,” press the
foot switch instead of [
foot switch instead of [
●
REC].
1.
Press [SONG] so it’s lit.
2.
Press [
] to return to the beginning of the song.
3.
Press [
] to start song playback.
4.
Press [
] once again to stop song playback.
You can use the following buttons to change the playback location
within the song.
within the song.
• [
]
Moves to the beginning of the song.
• [
]
Moves to the preceding measure.
• [
]
Moves to the next measure.
Repeat Playback of a Specified Region
You can specify a region (A–B) and play it repeatedly. You can do
this while the song is playing or while it is stopped.
this while the song is playing or while it is stopped.
fig.repeat
1.
Use [
][
] to move to the measure at which you
want to start repeating.
2.
Press [MARKER A-B] to set marker “A” to the current
location.
location.
3.
Use [
][
] to move to the measure at which you
want to stop repeating.
4.
Press [MARKER A-B] to set marker “B” to the current
location.
location.
5.
Press [REPEAT A-B] so it’s lit.
6.
If the song was stopped, press [
] at this point to
begin repeat playback.
To cancel repeat playback, press [REPEAT A-B] so it goes out.
Don’t set the marker at the last measure of the song; repeat
playback will not work correctly if you do this.
playback will not work correctly if you do this.
Here’s how you can mute (silence) a specific track of the song.
Muting a Track
1.
Press [DRUMS & BASS] (factory setting: track 10),
[COMBO] (factory setting: track 1), or [FULL] (factory
setting: track 2) to specify the track you want to mute.
[COMBO] (factory setting: track 1), or [FULL] (factory
setting: track 2) to specify the track you want to mute.
2.
Press [
]. The song begins playing, with the track you
specified in step 1 muted.
Changing the Muted Tracks
You can change the track that is muted by each of the buttons
[DRUMS & BASS], [COMBO], and [FULL].
[DRUMS & BASS], [COMBO], and [FULL].
1.
Hold down one of the buttons [DRUMS & BASS], [COMBO],
or [FULL].
or [FULL].
The mute track setting screen will appear.
2.
Use TEMPO [
(-)][
(+)] to change the track that is
muted by that button.
Playing the Song
Changing the Playback Location of
the Song
the Song
Minus-One Playback
E-09_e.book 21 ページ 2007年4月26日 木曜日 午前10時20分