Output Solutions ez-1000plus Guide De Référence
^Fname - Download label format to printer
Syntax
^Fname
data
data
Parameter
name = the name of label format (up to 20 characters)
data = the data containing the label formatting command for this stored format
data = the data containing the label formatting command for this stored format
Description
Download label format to the memory of printer. After the download is completed, the printer
will beep once (refer to page37).
will beep once (refer to page37).
^Fname
:
:
^L
:
:
E
:
:
^L
:
:
E
Control/Setup command
Label format command
data
Duplicate name inspection: If you use the same file name, the printer will print “REPEAT
FILE NAME”, and the format will not be stored to the memory.
FILE NAME”, and the format will not be stored to the memory.
^Gn - Enable/disable See-Through sensor
Syntax
^Gn
Parameter
n = 0, disable see-through sensor (default setting)
n = 1, enable see-through sensor
n = 1, enable see-through sensor
Description
The reflective sensor may not be able to detect the label gap on special label materials. For
example, when printing on labels with thick liner, colored liner, or back graphics, the see-
through sensor would need to be enabled, since the reflective sensor may not work
correctly.
*When the see-through sensor is enabled, the moveable sensor must be placed in the
center of the printer.
example, when printing on labels with thick liner, colored liner, or back graphics, the see-
through sensor would need to be enabled, since the reflective sensor may not work
correctly.
*When the see-through sensor is enabled, the moveable sensor must be placed in the
center of the printer.
^Hx - Print darkness setting
Syntax
^Hx
Parameter
x = 00 ~ 19
Description
Set the darkness of printing.
^Kname - Recall label format
Syntax
^Kname
Parameter
name = the name of recalled label format (up to 20 characters)
Description
Recall a label format stored in printer’s memory (refer to page37)
^Kname
:
:
E
:
:
~Px
:
:
E
:
:
~Px
data
Control/Setup command [option]
^L - The start sign of label format
Syntax
^L
Parameter None
Description
Description
Define the start sign of Label format. Commands to set up the label format should be listed
after this command.
after this command.
^Mx - Set the forward length
Syntax
^Mx
Parameter
x = 0~1000 (unit: mm)
Description
Set the forward length of the paper
6