ASKProxima impression 1280 Mode D'Emploi

USER GUIDE

SXGA LCD PROJECTOR

15

This section will aid in adjusting a stable, flicker-free image for best
viewing results.

Use the remote control or the projector keypad to adjust settings, either
directly or through the menu system.

The following list aids in a trouble free set-up of the projector. Try using a
patterned background (tiles, checkerboard pattern etc.) when adjusting the
image.

1.  FOCUS AND POSITION IMAGE. The projection lens has a manually

adjustable focus. Place the projector at a suitable distance to the
projection screen to obtain the desired screen size. (See the Technical
Data section for max. and min projection distances.) Focus the image
and observe that the picture elements (pixels) become sharp on screen.
The projector has two adjustable feet in the front, so that the image can
be shifted to a desired height on the wall. Tilt the projector body in the
desired position and press the foot-release buttons. If necessary, fine
adjust the height by adjusting the feet either direction. Use the rear
adjustable feet to correct a tilted image.

2.  RESET in most cases automatically adjusts the image position, width

(FREQUENCY) and stability (TUNE). If RESET fails to adjust the
image correctly, see FREQUENCY, POSITION and TUNE below.
RESET is automatically activated when a new source is connected.