ASKProxima impression 1280 Mode D'Emploi
USER GUIDE
SXGA LCD PROJECTOR
26
9 CEILING MOUNTING
The projector is prepared for ceiling mounting. As opposed to desktop use
(most tables are approx. 80 cm tall, are flat and have a hard surface
finish), ceilings vary in height and material. Also considerations must be
made with respect to signal and power wiring.
(most tables are approx. 80 cm tall, are flat and have a hard surface
finish), ceilings vary in height and material. Also considerations must be
made with respect to signal and power wiring.
9.1
SELECTING A MOUNT
Various mounting systems are available from different sources. Contact
your dealer for further details or consult vendor catalogues.
your dealer for further details or consult vendor catalogues.
Be sure that the vendor has tested the mount with this specific
projector for operational safety.
projector for operational safety.
Check that the mounting brackets fit the six integral M4 screw mounts (see
illustration below) of the projector, and that the ventilation slots are not
blocked. Avoid using screws that penetrates more than 13 mm into the
screw mounts (min. length 10 mm).
illustration below) of the projector, and that the ventilation slots are not
blocked. Avoid using screws that penetrates more than 13 mm into the
screw mounts (min. length 10 mm).
372
175
270
180 mm
45