ASKProxima m6 Guide De Référence

: allows adjustments to the volume.

: 

allows you to assign a particular input to a specific source key 

when using an optional remote. Also allows selection of a default Power-up 
Source and enables or disables Autosource. 

When Autosource is not checked, the projector 

defaults to the source selected in Power-up Source. If no source is found, a 
blank screen displays. When Autosource is checked, Power-up Source 
determines which source the projector defaults to at startup. If no signal is 
present, the projector checks the sources in order until a source is found or 
until power down. 

this determines which source the projector 

checks first for active video during power-up. 

When Autosource is selected, the Source Enable 

feature indicates which sources the projector attempts to lock onto. You can 
use the Source Enable feature to eliminate certain sources from this search, 
which will speed the search. By default, the check boxes for all sources are 
checked.

 allows you to adjust the position of the OSD. By 

default, the menus are positioned in the upper lefthand corner of the dis-
played image and the messages are positioned in the lower lefthand corner. 
Adjust the offset to move these items more to the right and middle of the 
display. 

reverses the image so you can project from behind a translucent 

screen.

: When Auto Power is checked, the projector automatically 

goes into the startup state after the projector is powered on. 

: displays status messages (such as “Searching” or 

“Mute”) in the lower-left corner of the screen.

Audio

Settings

Sources

Power-up 
Source

System