Philips MCD735 Mode D'Emploi

33

➜

On: Select this to level out the volume. This

feature is only available for movies with Dolby
Digital mode.

➜

Off: Select this when you want to enjoy the

surround sound with its full dynamic range.

The options included in Video Setup page are:
“Component”, “TV Mode” and “Quality”.

Sets the video output according to your video
connection. This setting is not required if you are
using the VIDEO OUTPUT jack (yellow) to
connect the DVD micro system to your TV.

➜

Ypbpr: Select this if you have connected the

DVD micro system to your TV using Component
video jacks.

➜

S-Video: Select this if you have connected

the DVD micro system to your TV using S-Video
jack.

Selects interlace or P-SCAN video output mode
when Ypbpr is selected.

➜

P-SCAN and Interlace.

In the progressive scan mode, you can enjoy the
high quality picture with less flickers. It only
works when you have connected the DVD
player's Y Pb Pr jacks to your TV that supports
the progressive video input. Otherwise, a
distorted picture will appear on the TV. For
proper progressive scan set up, see “Getting
Started-Setting up Progressive Scan feature”.

This menu helps you to set the video quality.

1

Press 3 4 to highlight “Quality”.

2

Press 2 or OK to enter Video Quality Setup.

The options included in Video Quality Setup
page  are: “Sharpness”, “Brightness”, “Contrast”,
“Gamma”, “Hue”, “Saturation”  and “Luma  Delay”.

Sharpness
Adjusts the sharpness level.

➜

High, Medium and Low.

Brightness
Adjusts the brightness level. Range: -20-+20.

Contrast
Adjusts the contrast level. Range: -16-+16.

Gamma
Adjusts the gamma level.

➜

High, Medium, Low and None.

Hue
Adjusts the hue level. Range: -9-+9.

Saturation
Adjusts the saturation level. Range: -9-+9.

Luma Delay
Adjusts the luma delay.

➜

0 T and 1 T.

The options included in Preference page are: “TV
Type”, “Audio”, “Subtitle”, “Disc  Menu”, “Parental”
and “Default”.

pg001-043_MCD735_37_Eng

2006.7.20, 15:14

33