Raritan P2-UMT832M Mode D'Emploi

C

HAPTER 

4:

 

O

PERATION 

–

 

A

DMINISTRATOR 

F

UNCTIONS

 57 

 

 

 

ƒ  In the case of a target associated with multiple outlets, such as a server with dual 

power supplies, pressing A will highlight all the associated outlets, allowing them to 
be turned on, off, or recycled simultaneously. 

A connected power strip is treated as a tiered device. The power strip, therefore, has its own 
device menu consisting of “ports” for each power outlet with which power can be controlled on a 
per-outlet basis. 
•  Navigate the Paragon II OSUI, select the Raritan Power Strip and press Enter  .  You will 

now be at the “Outlet Selection” menu.  

•  A list of outlets (up to 8 per page) will appear. Targets in green are switched ON; targets in 

black are switched OFF. 

•  As with the ”Server Selection” Menu, press X, O, or R to turn off, turn on, or recycle power 

to the target respectively. Type “yes” to confirm turning off the power if you select X or R. 

 
Getting Power Strip Unit Status from the Outlet Selection Menu 
At any time while navigating the “Outlet Selection” Menu, pressing F11 will provide a status 
screen showing certain parameters of the connected power strip.  These parameters include: 
•  Average power 

•  True RMS Current 
•  True RMS Voltage 

•  Internal Temperature 
•  Apparent Power 

•  Maximum Detected 

•  Outlet Circuit Breaker 

 
Paragon II Network Port 

Paragon II contains a network port and is designed as a network-aware device.  This network port 
is used to communicate with Paragon Manager administrative software, packaged with the 
Paragon II unit (please see the Paragon Manager User Guide for additional information).