Thetford de-0751 Mode D'Emploi

4

Your refrigerator has an over current protection
system in the electronic circuit to prevent damage to
the inverter which may occur due to a reverse polarity
connection.

If the refrigerator does not operate and the green
power light does not come on, check the  fuse,
which is located on the side of the inverter case, and
the polarity of the DC power supply.  If the refrigerator
still does not operate, another problem can exist in
the inverter.  Have an authorized Norcold Service
Center check the refrigerator.

It is normal for frost to collect on the freezer plate inside the refrigerator.  Excess frost
decreases the cooling performance of the refrigerator.  Defrost the refrigerator as neces-
sary.

 Do not use sharp objects, a hair dryer, a heat gun, etc. to defrost the

refrigerator.  Damage to the interior of the refrigerator can occur.

- Turn the thermostat to “OFF”.

-  Remove all food from the refrigerator.

NOTE:  Defrosting the refrigerator makes excess water inside the refrigerator.

-  Put dry towels (etc.) inside the refrigerator to absorb the excess water.

-  Put trays of hot water in the freezer until the frost is melted.

-  Empty the drip tray.

-  Remove the wet towels (etc.) and dry the inside of the refrigerator

-  Turn the thermostat to the desired setting.

-  Put the drip tray and all food in the refrigerator.