Fujifilm 6800 Zoom Mode D'Emploi

41

40

Switch off the camera and TV. Plug the A/V
cable (accessory) into the A/V OUT (audio-visual
output) socket on the camera.

Plug the other end of the cable into the
audio/video input socket on the TV. Then switch
the camera and TV on and take pictures or play
back images as you would normally.

●

If you connect the A/V cable during playback, you
will not hear the sound from the camera.

●

The image continues to be displayed on the LCD
monitor.

●

If you disconnect or reconnect the A/V cable while
the power is switched on, the sound may not be
output correctly.

●

If there is a power outlet available, connect the 
AC-5V/AC-5VH AC Power Adapter.

●

If your TV has stereo audio input sockets, plug the
cable into the left (white) socket.

●

Refer to the instructions provided with your TV for
more information on audio and A/V input for your TV.

Press the “

d

” or “

c

” button to display the image

to be erased.

Press the “MENU/OK” button to erase the
displayed image. When erasing is complete, the
next image appears and the “

™

” message

is displayed.

●

To cancel single-frame erase, press the “BACK”
button to return to the menu. To exit the menu screen,
press the “BACK” button again.

●

If  “

¡

” is displayed, the image protection

must be removed to erase the image (

➡P.81).

●

If the “

º

” message is displayed,

DPOF is specified. When you press the “MENU/OK”
button, the image is erased and the DPOF settings
are updated.

To continue erasing images, repeat the
procedure from step 

.