Fujifilm S2-Pro Manuel Du Propriétaire

22

23

Set the power switch to OFF to switch the
camera off.

Set the power switch to OFF to switch the
camera off.

1Lift out the battery holder lock tab.
2Turn the battery holder lock tab counterclockwise

to unlock the battery holder.

3Pull the battery holder out.

Load the AA-size batteries in the direction
indicated by the Ω and ≈ labels on the holder.

Push the battery holder in and hold it in place as
you turn the battery holder lock tab clockwise to
securely lock the battery holder.

Open the battery compartment cover.

Load the lithium batteries in the direction
indicated by the Ω and ≈ labels on the camera.

1

2

●

Do not apply excessive force to the battery cover.

●

Remove the batteries more easily by pushing the
batteries upwards from the gap at the opposite end from
the battery holder lock tab.

●

Take care not to drop the batteries when opening or
closing the battery cover.

Firmly close the battery compartment cover.

2

3

1

3

2

1

h CR123A batteries: 2 (lithium)
h AA batteries: 4 (alkaline or nickel-metal hydride)

◆

◆

h Never use a battery when the outer casing is split or peeling as

this could result in a short-circuit and cause major problems
due to battery fluid leakage or overheating.

h Do not use AA-size lithium, manganese or nickel-cadmium (Ni-

Cd) batteries.

h Do not use batteries of different types or brands together and

do not use new batteries together with used batteries.

h The useful life of alkaline batteries varies depending on the brand. The life of some batteries may

be considerably shorter than the batteries supplied with the camera. Due to the nature of alkaline
batteries, the time for which they can be used is shorter in cold locations (+10°C (+50°F) or below).

h Soiling such as fingermarks or grease on the poles of batteries can significantly reduce the

number of shots that can be taken.

h See P.112 for other precautions concerning the use of batteries.