Fujifilm S2-Pro Manuel Du Propriétaire

72

73

Sets the quality of the photographed image. Select settings suited to the purposes for which the
photograph will be used.
Select  “Fine” for better quality and “High” to record an uncompressed image with the highest
available image quality.
The “Normal” setting provides ample image quality for most purposes.

h Factory default setting: 

Normal

Normal

Allows you to record the largest number of images.

Fine

Records images in high quality bettered only by the “High” setting. This mode allows
you to record more images than the “High” setting.

High

TIFF-RGB: Select this setting to record uncompressed images with the highest

available image quality.

CCD-RAW (

➡P.122): No image processing is performed on the camera. Select this

setting when you want to process the image on a PC.

Sets the size of the photographed image.

h Factory default setting: 

3024 

× 2016

1440

Sets the image size to 1440 

× 960 pixels (approx. 1.38 megapixels).

You can record the largest number of images in this mode.

2304

Sets the image size to 2304 

× 1536 pixels (approx. 3.53 megapixels).

3024

Sets the image size to 3024 

× 2016 pixels (approx. 6.12 megapixels).

4256

Sets the image size to 4256 

× 2848 pixels (approx. 12.12 megapixels).

You can record the fewest images in this mode.

Auto Focus provides two AF modes. In Single-area AF mode, the shot is focused using the
selected focus area, while in Dynamic AF mode, multiple focus areas are used to set the focus.
See P.39 for more detailed information on the AF area modes.

h Factory default setting: 

Single-area

Single-area

AF

Useful for situations where you want to focus
accurately on a more or less stationary subject.

Dynamic AF

or

or

Useful for shots where it is difficult to accurately
keep the subject in a given focus area, such as
when you are tracking a moving subject.

w

◆

◆

w AF AREA/QUALITY/RECORDED PIXELS

CCD-RAW images, because they are not processed on the camera, can only be recorded at the
“4256 

× 2848” image size. These images must always be processed using software on a computer.

h To shoot CCD-RAW images, set up the camera as follows:

1. Select the “CCD-RAW” setting as the “HIGH mode” option in SET–UP (

➡P.89).

2. Set the Quality to “High”.

●

When you display a CCD-RAW image, the frame number is highlighted.

●

“

5

” is displayed as the resolution.