Fujifilm S2-Pro Manuel Du Propriétaire

101

100

1Load the media containing your shots into the

camera.

2Switch the camera on.
3Select  “1394 DOWNLOADING” as the “PC

MODE” setting in SET–UP (

➡P.89).

4Set the power switch to “OFF” to switch the

camera off.

●

Refer to the operating system compatibility charts on
P.100 and check that your operating system supports the
IEEE1394 interface.

●

Use of the AC power adapter (sold separately) is
recommended when connecting the camera to a
computer.

●

If a SmartMedia and Microdrive are both loaded into the
camera at the same time, the media selected in the
“MEDIA” setting in SET–UP is used (

➡“Setup”, P.89).

1Switch your PC on.
2Connect the camera to the computer using

the bundled IEEE1394 cable.

3Switch the camera on.

0

1

0

2

Always use the prescribed procedure when
disconnecting or switching off the camera
(

➡P.103).

●

In Windows XP and Mac OS X, automatic startup must be set up the first time you connect.

●

The first time you connect, the media may take a few moments to mount.

●

Take care to ensure that the cable is connected the right way round and that the plugs are firmly inserted all
the way into the sockets.

h The Access lamp blinks when the camera

and computer are exchanging data.

h “1394 DOWNLOADING” is displayed on

rear display panel.

h The Auto Power Off function is disabled

while the camera is connected to a
computer.

●

When replacing the media, always switch the camera
and computer off first using the procedure described
on P.103.

●

Do not disconnect the USB cable when the camera is
communicating with the PC. See P.103 for information
on the disconnection procedure.

h If FinePixViewer is installed, it starts up

automatically.

h A removable disk icon appears and you

can use your PC to transfer files to and
from the camera.

✽ Screen for

Windows 98 SE

If the above operations do not occur, you do
not have the required software programs or
drivers installed on your PC. Refer to the
Software Quick Start Guide booklet and
complete the required PC setup procedures.
Then reconnect the camera to your PC.

Windows

Macintosh

Install the software before connecting the camera to a computer.
The available functions differ depending on the camera’s PC mode settings, as shown below.

Bundled “software for FinePix”
CD-ROM

Optional “hyper-Utility
software”

ＰＣ

ＰＣ ＭＯＤＥ

ＭＯＤＥ

ＵＳＢ

ＵＳＢ  ＤＯＷＮＬＯＡＤＩＮＧ

 ＤＯＷＮＬＯＡＤＩＮＧ

ＰＣ

ＰＣ ＭＯＤＥ

ＭＯＤＥ

１３９４

１３９４ ＤＯＷＮＬＯＡＤＩＮＧ

ＤＯＷＮＬＯＡＤＩＮＧ

ＰＣ

ＰＣ ＭＯＤＥ

ＭＯＤＥ

１３９４ ＳＨＯＯＴＩＮＧ

１３９４ ＳＨＯＯＴＩＮＧ

xAllows the camera to be 

controlled and shots to be 
taken from a computer.

xImages photographed with 

the camera can be 
automatically saved on the 
computer.

Special USB cable

USB driver

Shooting driver

IEEE 1394 cable

xAllows photographed images to be saved on a computer 

xCCD-RAW files can be played back and converted to other 

formats.

xVoice memos can be played back.

h Refer to the User’s Guide for the optional Hyper-Utility Software HS-S2 for more information

on the photography modes.

h This description covers the downloading modes.

To connect the camera to a computer via a USB port, the computer must be equipped with a
USB port as a standard feature. (Operation is not guaranteed for USB ports added later.) To
connect via an IEEE1394 port, check that the interface is OHCI compliant and then refer to the
table below to check whether it is supported by your operating system.

■ Operating System Compatibility Chart (Windows)

u

: Can be connected   

✕: Cannot be connected

✕

u

✽2

u

u

u

IEEE1394

u

u

u

u

u

USB

✽1

✽1 Can be used by installing the driver from the bundled CD-ROM.

✽2 Select Windows Update from the Start button menu and update the 1394 device driver (Your system must be

capable of connecting to the Internet).

■ Operating System Compatibility Chart (Macintosh)

u

: Can be connected   

✕: Cannot be connected

✽1 Can be used by installing the driver from the bundled CD-ROM.

✽2 Cannot be used even when installed as a standard feature, but can be used by downloading and installing the free

update to Mac OS 9.1. Contact Apple Computers (http://www.apple.com) for information on software updates.

✕

✕

✽2

u

u

u

IEEE1394

u

u

u

u

u

USB

✽1

ＦＲＡＭＥ ＮＯ．

ＦＲＡＭＥ ＮＯ．

ＯＦＦ

ＯＦＦ

ＳＥＴ−ＵＰ

ＳＥＴ−ＵＰ

ＲＥＳＥＴ ＡＬＬ

ＲＥＳＥＴ ＡＬＬ

ＢＥＥＰ♪

ＢＥＥＰ♪

ＤＡＴＥ／ＴＩＭＥ

ＤＡＴＥ／ＴＩＭＥ

ＯＫ

ＯＫ

ＳＥＴ

ＳＥＴ

ＬＯＷ

ＬＯＷ

ＰＣ ＭＯＤＥ

ＰＣ ＭＯＤＥ

１３９４ 

１３９４ ＤＯＷＮＬＯＡＤＩＮＧ

ＤＯＷＮＬＯＡＤＩＮＧ

ＬＡＮＧＵＡＧＥ

ＬＡＮＧＵＡＧＥ

ＥＮＧＬＩＳＨ

ＥＮＧＬＩＳＨ

ＯＫ

ＯＫ

ＢＡＣＫ

ＢＡＣＫ

0

2

0

1

0

3