Alphasmart neo Mode D'Emploi

Page de 160
W
O R K I N G
 
W I T H
  A
L P H A
S
M A R T
  M
A N A G E R
Deleting SmartApplets from NEOs
NEO and NEO 2 by AlphaSmart
104
. . . . .
Deleting SmartApplets from NEOs
To remove SmartApplets from your NEOs, use the SmartApplets tab in 
AlphaSmart Manager. On this tab, you select the SmartApplets you want to 
keep and choose to delete all other SmartApplets as described in the steps 
below.
Normally, you would not need to delete SmartApplets from your NEOs, even 
if you are not using them. However, you might want to remove SmartApplets 
to free up memory or because you’re beginning a new session or activity in a 
classroom. 
Important: If you remove SmartApplets, you also remove any files 
associated with them. For example, if you remove KeyWords, you also remove 
any KeyWords work your students have done and progress reports. If there is 
information on the NEOs that you want to save, be sure to retrieve the data 
first.
Follow these steps to delete SmartApplets from NEOs:
1. In AlphaSmart Manager, click the SmartApplets tab.
2. Click each SmartApplet you want to install or keep in the SmartApplets 
List 
A
, then click Add => to move it to the Install List 
B
. You should add 
all SmartApplets that you want on your NEOs, including those that are 
already installed on the NEOs.
3. Check the box above the SmartApplet list 
C
 to specify that all 
SmartApplets that aren’t in the Install List should be deleted from NEOs. 
If you want to deny 
users access to a 
SmartApplet 
installed on your NEO, 
consider disabling it rather 
than removing it. Disabling 
turns off the SmartApplet until 
you enable it again. Some 
SmartApplets take some time 
to install, so disabling can 
save you time if you plan to 
use the SmartApplet again in 
the future but want to prevent 
access for specific activities. 
See page 109 
to find out how 
to disable SmartApplets in 
AlphaSmart Manager.
Neo UG.book  Page 104  Friday, August 31, 2007  8:03 AM