Alphasmart neo Mode D'Emploi

M A R T

P P L E T S

Managing SmartApplets

NEO and NEO 2 by AlphaSmart

. . . . .

How to Change the Startup SmartApplet from the SmartApplets Menu

1. Press applets.
2. Use the arrow keys to move the cursor next to the SmartApplet that you

want to start when you turn on your NEO.

3. Press ctrl-applets. An asterisk designating the startup SmartApplet

appears in the menu.

Repeat the steps to turn the setting off.

How to Disable a SmartApplet from the SmartApplets Menu

Follow the steps below to disable a SmartApplet on the NEO. You can also
disable SmartApplets using AlphaSmart Manager; see page 109.

1. Press applets.
2. Move the cursor next to the SmartApplet you want to disable.
3. Press ctrl-

-L.

4. Enter the master password (see page 112) and press enter. The

symbol appears next to the SmartApplet to show it has been disabled.

Repeats these steps to enable the SmartApplet.

If you want to disable the Calculator SmartApplet, from within AlphaWord
Plus, you can press ctrl-z-c and then enter the master password.

If you don’t set a
startup SmartApplet,
when you turn on your

NEO, it goes to the
SmartApplets list, with the
cursor next to the SmartApplet
you were working in when you
turned the NEO off.

You need the master
password to disable
SmartApplets. You

can use AlphaSmart Manager
to set this password (see
page 112) or contact
Technical Support to get the
default master password.

Neo UG.book Page 56 Friday, August 31, 2007 8:03 AM