Alphasmart neo Mode D'Emploi

Resetting File Passwords

. . . . .

6. Type the current password. (If you’ve never changed it, the password is 

probably write.) Then, type the new password, press tab, and type the 
new password again to confirm it. Press enter when you’ve finished. A 
message appears telling you the password was changed.

7. Press any key to return to the AlphaWord settings.

1. Open the file for which you want to change the password. You need to 

enter the current password to open it. If you’ve never changed the 
password, you can use the default password, which is write, or you can 
enter the master password.

2. Press option-z-p. You will see a screen like the one below.

3. Type the current file password. Press tab and type your new password; 

then, press tab and type it again to confirm it.

4. Press enter. You’ll see a message that the password has been changed; 

then, you’ll return to your file.

If you forget file passwords, you can reset the passwords for all AlphaWord 
Plus files on this NEO back to the default password, which is write (or the 
password you chose in AlphaSmart Manager—see page 114). You can reset 
passwords from Control Panel or from within AlphaWord Plus as described 
below. You can also reset all file passwords using AlphaSmart Manager (see 
page 114).

1. Press applets.
2. Move the cursor next to Control Panel and press enter.
3. Move the cursor next to AlphaWord settings and press enter.

Neo UG.book  Page 79  Friday, August 31, 2007  8:03 AM