Alphasmart dana Mode D'Emploi

Connecting NEOs to Your Computer

. . . . .

After you have installed AlphaSmart Manager, you can follow these 
instructions to connect your NEO or SmartOption Mobile Lab to your 
computer.

1. Start AlphaSmart Manager (see page 4).
2. Use the USB cable that came with the 

NEO to connect it to your computer. 
Connect the end of the cable that is 
nearly square 

 to the NEO 

, and 

connect the other of the cable to a 
USB port on your computer 

.

1. Start AlphaSmart Manager (see page 4).
2. You’ll find a cable labeled “Computer” coming out of the cart. This cable 

has a USB connector that you can connect to your computer. Within the 
cart, each NEO 1 or NEO 2 laptop is connected to the cart with its own 
cable. (For more about setting up a SmartOption Mobile Lab, refer to the 
instructions that came with it.)

If your computer has Windows XP, you will see a Microsoft Hardware Wizard 
the first time you connect your NEO or SmartOption Mobile Lab to your 
computer. Follow these steps when the wizard starts:

1. A Found New Hardware message appears in the lower-right corner of the 

window; then, the Hardware Wizard starts. Accept the default option to 
install the software automatically; then, click Next >.