Alphasmart dana Mode D'Emploi

Changing the Startup SmartApplet for NEOs

. . . . .

Normally, AlphaWord Plus is the SmartApplet that starts when you turn on a 
NEO. If you want to change the startup SmartApplet, you can choose a 
different one in the System settings on the Settings tab. Follow these steps:

1. Make sure your NEO or SmartOption Mobile Lab is connected to your 

computer.

2. In AlphaSmart Manager, click the Settings tab.
3. Click System in the settings on the left 

.

4. In the settings list on the right, click the drop-down list next to Startup 

SmartApplet 

 and choose the SmartApplet that you want to start when 

the NEO(s) are turned on. When you do this, the box for the setting will 
automatically be checked.

5. Click the Send List tab and verify that your system setting change 

appears in the send list.

6. If you are using a SmartOption Mobile Lab and you want to send the 

setting change to some, but not all, of the NEOs, click Select Devices, 
check the numbers to which you want to send the change, then click OK. 
(To send to all connected NEOs, skip this step.)

7. Click Send. If you have set a send list password (see page 63), you must 

enter that password and click OK.