Canon MP450 Mode D'Emploi

Chapter 9

Changing The Machine Settings

For details, see “Performing Bluetooth Communication” on page 70.

„

Specifies the name of this machine that is displayed on a Bluetooth compatible device.

„

When this is set to <ON>, the machine denies access from a Bluetooth compatible device.

„

When this is set to <Enable>, the passkey can be specified.

„

Changes the passkey.

„

Changes the display order for shooting dates to be printed.

„

Selects whether to allow data to be written onto memory cards from a computer.

„

Specifies the time until Power saving is enabled.

„

Use this to adjust the contrast of the LCD if it is too low or too high.

„

Displays the photos clearly during the slide show.

z

When <Print date only> or <Print date & file no.> is selected in the 
<Settings 1> tab on the Settings screen (Memory card), the shooting 
date is printed in the date display order you selected. For Print 
settings, see “Changing The Print Settings” on page 26.

z

The shooting date format is as specified in the DPOF setting from 
DPOF printing.

If you set this setting to <Read/write mode>, the operation for printing or 
maintenance cannot be performed. After you finish operation of the 
memory card dedicated drive, be sure to revert this setting to <Read-only 
mode>. 

When <Image quality: Std> is selected, images are displayed at 5-second 
intervals. When <Image quality: High> is selected, images are displayed 
at different time intervals according to their resolutions.