Ricoh 2035e Manuel D’Utilisation
Reception Functions
95
5
-Specifying E-mail Transfer
The originator can request transfer of e-mail sent to another fax machine by spec-
ifying the e-mail address as follows:
ifying the e-mail address as follows:
v Fax Number
fax=destination fax number@host name of this machine. domain name
Example: to transfer to fax number 212-123-4567, specify:
fax=2121234567@abc.company.com
Example: to transfer to fax number 212-123-4567, specify:
fax=2121234567@abc.company.com
v Quick Dial Destination
fax=#registration number of 5 digits or less@host name of this machine.do-
main name
Example: to transfer to the destination number 00001:
fax=#00001@abc.company.com
main name
Example: to transfer to the destination number 00001:
fax=#00001@abc.company.com
v Group Destination
fax=#**registration number of 5 digits or less@host name of this machine.do-
main name
Example: to transfer to the destination programmed under Group number 04:
fax=#**04@abc.company.com
main name
Example: to transfer to the destination programmed under Group number 04:
fax=#**04@abc.company.com
JBIG Reception
The optional fax function upgrade unit is
required.
required.
If you use JBIG (Joint Bi-level Image
Experts Group) compression, you can
send photographic originals faster
than with other methods of compres-
sion. You can only use this function
with G3 line type. It allows you to re-
ceive messages sent in the JBIG for-
mat through JBIG Transmission.
Experts Group) compression, you can
send photographic originals faster
than with other methods of compres-
sion. You can only use this function
with G3 line type. It allows you to re-
ceive messages sent in the JBIG for-
mat through JBIG Transmission.
Limitation
r If ECM is turned off, JBIG Recep-
tion is unavailable. See p.78 “ECM
(Error Correction Mode)”.
(Error Correction Mode)”.
Note
r When the optional extra G3 inter-
face unit is installed, JBIG recep-
tions of G3-2 and G3-3 lines are as
standard.
tions of G3-2 and G3-3 lines are as
standard.
Auto Fax Reception Power-up
This machine can be set to shut down
automatically if no one has used it for
a while. In these situations, even
though the operation switch is off, the
machine can still receive incoming
messages as long as the main power
switch is on.
automatically if no one has used it for
a while. In these situations, even
though the operation switch is off, the
machine can still receive incoming
messages as long as the main power
switch is on.
Important
r Reception is not possible if both
the operation switch and main
power switch are turned off.
power switch are turned off.
Note
r You can set whether messages are
printed as soon as they are received
(Immediate Reception) with the
User Parameters. See p.159 “User
Parameters” (switch 14, bit 0).
(Immediate Reception) with the
User Parameters. See p.159 “User
Parameters” (switch 14, bit 0).
r You can also have fax messages re-
ceived by Memory Reception
(Substitute Reception) printed af-
ter the machine is turned on.
(Substitute Reception) printed af-
ter the machine is turned on.