Extreme summitpx1 Manuel D’Utilisation
Px Series Application Switch Installation and Configuration Guide
10-7
Managing and Troubleshooting Operation
Managing and Troubleshooting Operation
Table 10-5 lists the commands that are used to display management and troubleshooting
information.
information.
flg
The configured flags for the server or service.
■
E = checks enabled
■
D = down
■
U = up
■
R = MAC address of server is resolved
■
N = MAC address of server is not resolved
■
F = forced down
curr-cons
The current number of connections for the server. Not shown for virtual
services.
services.
max-connections
The configured maximum number of connections for the server. Not
shown for virtual services.
shown for virtual services.
run
When positive, the number of consecutive check passes, up to the
restore-after value.
restore-after value.
When negative, the number of consecutive check failures, up to the
fail-after value.
fail-after value.
ra
The configured restore-after value.
fa
The configured fail-after value.
Table 10-5: Management and Troubleshooting Commands
Command
Description
show errors
Displays any system-level errors that have been detected.
show syslog
Displays the contents of the system log.
Table 10-4:
show server details
Information
Column
Description