Daewoo dwr-we33ws Mode D'Emploi

16

The dryer must be connected to the cold water faucet using the

new inlet hoses. Do not use old hoses.

1. If space permits, attach the brass female end of the “Y”

connector to the cold water faucet.

2. Turn the cold water faucet off.

3. Attach the straight end of long hose to “Y” connector.

4. Using pliers, tighten the coupling with an additional two-thirds

turn.

5. Attach angled end of long hoses to fill the valve at the bottom

of the dryer’s rear frame. Screw on coupling by hand until it is

seated on fill valve connector.

6. Using pliers, tighten the coupling with an additional two-thirds

turn.

7. Check that the water faucets are on.

8. Check for leaks around “Y” connector, faucets and hoses.