IBM 390 Mode D'Emploi
Troubleshooting Charts
Port Replicator Problems
Problem
Action
The computer hangs
when you power on or
resume operation.
when you power on or
resume operation.
Make sure that the computer is securely attached to the port replicator.
If there is still a problem, have the port replicator serviced.
The MIDI port of the
port replicator does not
work.
port replicator does not
work.
To enable the MIDI port of the port replicator, use the ThinkPad Configuration
program. Make sure that the MIDI port is enabled by doing the following:
program. Make sure that the MIDI port is enabled by doing the following:
1. Start the ThinkPad Configuration program.
2. Click on MIDI Port (
).
3. Select Enable.
4. Click on OK.
5. Close the ThinkPad Configuration program and restart the computer.
Note: When you restart the computer, you might need to install the MIDI driver.
Follow the instructions on the screen and install the device driver for your
computer's operating system.
computer's operating system.
Chapter 4. Solving Computer Problems
113