IBM 390x Manuel De Montage
Bottom View
Tilt feet
Memory
door
door
Battery-pack
latch
latch
Bay LED
System-expansion
connectors
connectors
UltraBay FX
device lock
device lock
Electrical Safety Notice
DANGER
Electrical current from power, telephone, and com-
munication cables is hazardous. To avoid shock
hazard, connect and disconnect cables as shown
below when installing, moving, or opening the
covers of this product or attached devices. The
3–pin power cord must be used with a properly
grounded power outlet.
munication cables is hazardous. To avoid shock
hazard, connect and disconnect cables as shown
below when installing, moving, or opening the
covers of this product or attached devices. The
3–pin power cord must be used with a properly
grounded power outlet.
Turn everything OFF.
First, attach all cables
to devices.
to devices.
Attach the signal
cables to the
receptacles.
cables to the
receptacles.
Attach the power
cord to an outlet.
cord to an outlet.
Turn the device ON.
To Connect
Turn everything OFF.
First, remove the
power cord from
the outlet.
power cord from
the outlet.
Remove the signal
cables from the
receptacles.
cables from the
receptacles.
Remove all cables
from device.
from device.
To Disconnect
Note:
In the U.K., by law:
The telephone line cable must be connected after the
power cord.
power cord.
The power cord must be disconnected after the tele-
phone line cable.
phone line cable.
Setting Up Your Computer
You are now ready to assemble and start your computer.
1. Insert the battery pack into the battery compartment located
near the left front end of the computer.
2