IBM 560x Manuel Du Matériel Informatique
1080 Hard Disk Drive
Attention
Do not drop or apply any shock to the hard disk
drive.
drive.
Before removing the drive, have the user make a
backup copy of all the information on the drive. Never
remove the drive while the system is operating or is in
suspend mode. Remove the hard disk drive exactly
as shown in the figure. Do not apply any extra force
to the hard disk drive when removing it.
backup copy of all the information on the drive. Never
remove the drive while the system is operating or is in
suspend mode. Remove the hard disk drive exactly
as shown in the figure. Do not apply any extra force
to the hard disk drive when removing it.
Battery Pack (1030)
Frame (1040)
Keyboard Unit (1050)
Step
Screw No. (See page 59)
Qty
Torque
.1/
1
1
4
kgcm
.5/
4
2
3
kgcm
When replacing: Make sure you use the correct screw, and
tighten all screws firmly to the torque shown in the table if you
have a torque screwdriver. Never use a screw that you
removed. Use a new one. Make sure the screws are
tightened firmly (see “Screw Tightening Information” on
page 22 if you do not have a torque screwdriver).
tighten all screws firmly to the torque shown in the table if you
have a torque screwdriver. Never use a screw that you
removed. Use a new one. Make sure the screws are
tightened firmly (see “Screw Tightening Information” on
page 22 if you do not have a torque screwdriver).
ThinkPad 560X (2640-60x, 70x)
69