IBM i series 1400 Manuel Complémentaire
Warning Notice to New Zealand Users of the IBM ThinkPad Modem
4. The equipment shall be set to ensure that calls are answered
between 3 and 30 seconds of receipt of ringing (S0 set
between 2 and 10). This ensures:
between 2 and 10). This ensures:
a. a person calling your modem will hear a short burst of
ringing before the modem answers. This confirms that
the call has been successfully switched through the
network.
the call has been successfully switched through the
network.
b. caller identification information (which occurs between
the first and second ring cadences) is not destroyed.
The preferred method of dialling is to use DTMF tones (ATDT...)
as this is faster and more reliable than pulse (decadic) dialling. If
for some reason you must use decadic dialling, your communi-
cations program must be set up to record numbers using the fol-
lowing translation table as this modem does not implement the
New Zealand "Reverse Dialling" standard.
as this is faster and more reliable than pulse (decadic) dialling. If
for some reason you must use decadic dialling, your communi-
cations program must be set up to record numbers using the fol-
lowing translation table as this modem does not implement the
New Zealand "Reverse Dialling" standard.
Note that where DTMF dialling is used, the numbers should be
entered normally.
entered normally.
NOTE THAT FAULT CALLOUTS CAUSED BY ANY OF THE
ABOVE CAUSES MAY INCUR A CHARGE FROM TELECOM.
ABOVE CAUSES MAY INCUR A CHARGE FROM TELECOM.
Number to be dialled:
0
1
2
3
4
5
6
7
8
9
Number to program into
computer:
computer:
0
9
8
7
6
5
4
3
2
1
40
IBM ThinkPad i Series 1400 Supplement