Fujifilm X100 Mode D'Emploi

The Setup Menu

 N

 N ISO AUTO CONTROL

Choose whether the camera automatically adjusts sensitivity if optimal exposure can not be achieved at current settings.  Select-
ing 

N ISO AUTO CONTROL displays the settings listed in the table below; press the command dial up or down to highlight a 

setting and press the dial right to display options for the highlighted item, then highlight the desired option and press MENU/OK.

When ISO AUTO CONTROL is on, the upper limit for sensitivity is fi xed at the value selected for MAX. SENSITIVITY. The camera 
will not exceed this limit even if underexposure would result.

If ON is selected, the camera will automatically adjust sensitivity if optimal exposure can not be 
achieved at current settings.

Choose the upper limit for auto sensitivity from ISO 400, 800, 1600, and 3200 (the lower limit is fi xed 
at ISO 200).

When the shutter speed dial is rotated to A and ISO AUTO CONTROL is ON, the camera will adjust 
sensitivity only as required to prevent shutter speed from being slower than this value. 

 

R In shutter-priority AE and manual exposure modes, the camera will automatically adjust sensitivity if optimal exposure can 

not be achieved at the shutter speed selected by the user.

 

R Sensitivity is automatically adjusted for optimal fl ash output when a fl ash is used.

 

R Shutter speed, aperture, and the current sensitivity are displayed when the shutter button is pressed halfway.

 B

 B RED EYE REMOVAL

((defaults to 

defaults to OFF)

Choose ON to remove red-eye eff ects caused by the fl ash.

 

R Red-eye reduction is performed only when a face is detected.

 

R Red-eye removal is not available with RAW images.