Fujifilm a101 Mode D'Emploi

You can use the digital zoom function for only
“

0

” Resolution (File Size) settings. Note that

the digital zoom only functions when you use the
LCD monitor to take shots.
To zoom in on your subject, press “a ”
(

[

TELE). To zoom out, press “b” (

]

WIDE).

●

You cannot use the digital zoom for resolutions of
“

9

”.

●

See P.54 for information on changing the file size
setting.

A “zoom bar” appears on the LCD monitor.

hDigital zoom focal distance (35 mm camera

equivalent)
Equivalent to approx. 36 mm – 72 mm
Max. zoom scale: 2

×

r

Selecting Macro mode allows you to take close-
up shots. If the flash is set to “AUTO” or “

:

Red-

eye Reduction mode”, it is automatically set to
“

u

Suppressed Flash mode”.

●

Effective Photography Range:
Approx. 8 cm to 13 cm (3.1 in to 5.1 in.).

●

Using the camera width (about 10 cm or 4 in.) as a
guide, ensure that the distance to the subject is
between 8 cm and 13 cm (3.1 in to 5.1 in.). The
camera will not focus on subjects outside this focal
range.

●

To use the flash, select the “

y

Forced Flash” or

“

;

Slow Synchro” setting in the menu screen

(

➡P.35, 36). However, you may not be able to obtain

the correct brightness (exposure) for your shot.

●

When shooting in dark conditions, use a tripod to
prevent camera shake.

●

The LCD monitor automatically switches on.

●

You cannot switch the LCD monitor off.

●

When you cancel Macro mode, the LCD monitor
remains on.

To switch to Macro mode, slide the Macro selector
switch towards the Macro icon until it stops.
“

r

” : The “

5

” icon appears on the LCD monitor

and you can take close-up shots.

“

t

” : Macro mode is cancelled and the camera

is ready for normal shooting (

➡P.19).

If you use the viewfinder to take a picture in
Macro mode, the field visible through the
viewfinder does not match the field actually
photographed because the viewfinder and lens
are in different positions. Accordingly, you
should use the LCD monitor to take pictures in
Macro mode.