Revel sub30 Mode D'Emploi
AUXILIARY BASS RADIATOR
Each REVEL ULTIMA SUB 30 also includes an auxiliary bass radi-
ator (on the cabinet bottom) with the following attributes:
ator (on the cabinet bottom) with the following attributes:
•
15-inch (381 mm) cast frame
•
Produces up to 2.2-inch (55.9 mm) peak-to-peak excursion that
serves to dramatically increase output at the lowest frequencies,
while reducing distortion
serves to dramatically increase output at the lowest frequencies,
while reducing distortion
ELECTRONICS
Each REVEL ULTIMA SUB 30 contains an electronics section with
the following attributes:
the following attributes:
•
An extremely low-distortion, 1,000-watt (rms) amplifier with
1,400-watt burst capability produces peak bass output up to
126 dB at 30 Hz in a standard listening room.
1,400-watt burst capability produces peak bass output up to
126 dB at 30 Hz in a standard listening room.
•
Inaudible protection circuit to guard against overload.
•
Three independent parametric equalizers, each with variable fre-
quency, bandwidth, and level controls, to allow you to precisely
tailor the room response and tame unwieldy acoustic anomalies.
quency, bandwidth, and level controls, to allow you to precisely
tailor the room response and tame unwieldy acoustic anomalies.
•
2-way crossover with variable frequency and selectable slopes
allows ideal response matching with other audio components.
allows ideal response matching with other audio components.
NOTE: For details on controls and connections, see “Rear Panel Layout”
on page 10.
on page 10.
CABINET
The REVEL ULTIMA SUB 30’s cabinet is constructed of 1-inch
(25 mm) thick MDF wall, optimally designed and internally braced
with the aid of laser interferometry, for unshakable performance.
(25 mm) thick MDF wall, optimally designed and internally braced
with the aid of laser interferometry, for unshakable performance.
REVEL ULTIMA SUB 30
Owner’s Manual
7