WinBook slc Mode D'Emploi

Page de 66
The Central Processing Unit
The Central Processing Unit (CPU) is the heart of any computer system, coordinating
the flow of data and controlling the hardware in a system.
The WinBook used the CYRIX CX486SLC CPU, which includes a built-in 1 Kbyte cache to
increase the speed of data access. The CPU uses a 32-bit internal data bus (path) and 16-bit
external data bus. Thus it offers the speed of 32-bit processing while still remaining fully
compatible with the 16-bit AT standard. Versions are available with a choice of CPU speed of
25MHz and 33MHz.
The WinBook uses the latest version of the CX486SLC CPU the “E” version. The “E” Version
supports the System Management Interrupt (SMI) feature, which in turn gives the WinBook state
of the art power management features (see chapter 8, for details).
Key Components
This manual contains full instructions for using all the functions of the WinBook. Some items in
the WinBook may vary, such as the hard disk drive type, but all basic functions will be the same.
In this section, a brief introduction to the various components in the system are given to give you
an overall understanding of the key parts and the names that will be used in this manual to
describe them.
The Main System Unit
By the main system unit, we refer to the bottom half of the whole system, i.e. the complete unit
excluding the LCD display and the keyboard. Contained within the
main system unit is the power supply, the mainboard, and the storage devices including hard and
floppy disk drives and an IC card unit (see below), the battery and all connectors.
Motherboard
The mainboard is contained within the main system unit and is not visible to the user. The
mainboard contains the following key components:
 CYRIX CX486SLC 35/33 CPU
 Socket for 80387SX math coprocessor
 2M (megabytes) of main memory (RAM) expandable to 4M or 8M
 ScatKat MCCS2038A chipset
 AMI BIOS with SETUP program and power management
Storage Devices