Samsung av-r700 Manuel D'Instructions
•
F.L (Front-Left)
: -10 ~ +10dB
•
CEN (Center)
: -10 ~ +10dB
•
F.R (Front-Right)
: -10 ~ +10dB
•
S.R (Rear-Right)
: -10 ~ +10dB
•
S.B (Rear Center)
: -10 ~ +10dB
•
S.L (Rear-Left)
: -10 ~ +10dB
•
S.W (Subwoofer)
: -10 ~ +10dB
24
23
Test Tone
Use test tone to check speaker connection status or defect of speaker or adjust the level.
Test Tone Output
Press and hold
SURROUND
button for about 5 seconds.
•
“SETUP MODE” appears on the display and enters into Setup Mode.
Press
INPUT
button 5 times.
•
“TEST-T MANU” appears in the display.
Press
SURROUND
button.
•
Each time you press this button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ S.B ➝ S.L ➝ S.W
will be selected in turn.
Press
SELECT
( )button to set the test tone as you want.
•
You can adjust the speaker output level from -10 to +10dB by 1 step.
√
Press and hold
SURROUND
button for about 5 seconds.
•
“SETUP MODE” appears on the display and enters into Setup Mode.
Press
INPUT
button 4 times.
•
“TEST-T AUTO” appears in the display.
Press
SURROUND
button.
•
Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝ S.R ➝ S.B
➝ S.L ➝ S.W .
•
During test signal output, press
SELECT
( ) button to adjust the speaker output
level from -10 to +10 dB by 1 step.
√
•
You cannot use test tone in 5.1CH MULTI CH function.
To Automatically Output Test Tone
To Manually Output Test Tone
MAIN UNIT
1
2
3
MAIN UNIT
1
2
4
3
To Stop Test Tone
Method 1) Press
INPUT
button 2 times.
•
“TEST-T OFF” appears on the display and test tone stops.
Method 2) Turn
VOLUME CONTROL.
•
“SETUP MODE OFF” appears on the display and test tone stops.
To Stop Test Tone
Method 1) Press
INPUT
button 1 time.
•
“TEST-T OFF” appears on the display and test signal stops.
Method 2) Turn
VOLUME CONTROL.
•
“SETUP MODE OFF” appears on the display and test tone stops.
Caution!
,
,
OPERA
TION