Samsung ht-as601 Manuel D'Instructions

Press SETUP button.

•

“SETUP MODE” appears on the display and enters into Setup Mode.

Press INPUT button one time.

•

“SPEAKER SETUP” appears in the display.

Press SURROUND button to select the speaker you want.

•

Each time you press this button, F.SPK

➝

C.SPK

➝

S.SPK

➝

SB SPK

➝

SW SPK

➝

CROVR will be selected in turn.

Press SELECT ( ) button to set the speaker mode.

To Exit Setup Mode

•

Wait for about 5 seconds or turn the VOLUME CONTROL of the main unit.
“SETUP MODE OFF” appears on the display and exits Setup Mode.

• LARGE :

Select when you use large speaker.
You can listen to full range sound.

• SMALL :

Select this when you use small speaker.
Bass below 100Hz will not be output.

• NONE :

Select this when you use no speaker.

• YES(Subwoofer) :

Select this when you use Subwoofer Speaker.

• NO(Subwoofer) :

Select when you do not use Subwoofer Speaker.

• CROVR:

Select the crossover frequency for the best bass response in
your room.

• F.SPK (Front) :

LARGE, SMALL

• C.SPK (Center) :

LARGE, SMALL, NONE

• S.SPK (Surround) :

LARGE, SMALL, NONE

• SB SPK (Surround Back) :

LARGE, SMALL, NONE

• SW SPK (Subwoofer) :

YES, NO

• CROVR (Crossover Frequency):

60, 80, 100, 120, 150, 180, 200Hz

CROVR(Crossover Frequency) for this unit is 150Hz.

Setting the Speaker

MAIN UNIT

OPERA

TION

Setting the Speaker Mode

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Frequency response from the speaker will be adjusted according to your speaker configuration and whether
certain speakers are used or not.

Press SPK SEL. button to select the speaker you want.

•

Each time you press this button, F.SPK

➝

C.SPK

➝

S.SPK

➝

SB SPK

➝

SW SPK

➝

CROVR

➝

SPK MODE OFF will be selected in turn.

Press …† button to set the speaker mode.

To Exit Setup Mode

•

Wait for about 5 seconds or press the SPK SEL. button of the remote control to
select SPK MODE OFF.

To turn the SUBWOOFER On or Off.

Press SUBWOOFER button.

•

Each time you press this button, SW SPK : YES, SW SPK : NO will be selected in turn.

√

•

If F.SPK is set to ‘SMALL’, SW SPK is automatically set to ‘YES’.

•

If S.SPK is set to ‘NONE’, SB SPK is automatically set to ‘NONE’.

•

You cannot use Speaker Setup Mode in 5.1CH MULTI CH function.

REMOTE CONTROL