Fujifilm s9100 Manuel Du Propriétaire

147

146

Digital camera FinePix S9100 / FinePix S9600

9.0 million pixels

1/1.6-inch Super CCD HR

xD-Picture Card (16/32/64/128/256/512 MB/1 GB/2 GB)
CF card and Microdrive™ (Compatibility is listed on Fujifilm website:
http://www.fujifilm.com/products/digital/)

Still image: DCF-compliant

Compressed: Exif ver.2.2 JPEG, DPOF-compatible
Uncompressed: CCD-RAW (RAF)

✽ Design rule for Camera File System compliant DPOF

compatible

Movie: AVI format, Motion JPEG
Audio: WAVE format, Monaural sound

Still image: 3488 

× 2616 pixels/3696 × 2464 pixels/2592 × 1944

pixels/2048 

× 1536 pixels/1600 × 1200 pixels/640 × 480 pixels

(

⁄

/

„

/

÷

/

3

/

2

/

`

)

See the table on P.150.

Fujinon 10.7

× optical zoom lens

F2.8-F4.9

f=6.2 mm-66.7 mm
(Equivalent to approx. 28 mm-300 mm on a 35 mm camera)

Approx. 2

× (10.7× optical zoom lens is used together: 

Max. zoom scale: 21.4

×)

F2.8 to F11 Up to 13 steps in 1/3 EV increments  Manual/Auto selectable

Normal: Wide-angle: approx. 40 cm (1.3 ft.) to infinity (In High-speed

shooting mode: approx. 2 m (6.6 ft.) to infinity)

Telephoto: approx. 2 m (6.6 ft.) to infinity (In High-speed shooting

mode: approx. 4 m (13.1 ft.) to infinity)

Macro: Wide-angle: approx. 10 cm (3.9 in.) to 3 m (9.8 ft.)

Telephoto: approx. 90 cm (3.0 ft.) to 3 m (9.8 ft.)

Super macro: approx. 1 cm to 1 m (0.4 in. to 3.3 ft.) (Wide-angle only)

AUTO/Equivalent to ISO 80/100/200/400/800/1600

TTL 256-zones metering Multi, Spot, Average

Program AE (

B

, 

√

, 

À

, 

U

, 

,

, 

/

, 

N

), Shutter-priority AE, Aperture-

priority AE, Manual exposure

√

(Picture Stabilization), 

À

(Natural light), 

U

(Portrait), 

,

(Landscape),

/

(Night)

–2 EV to +2 EV in 1/3 EV-step increments (

N

, 

M

, 

<

)

B

, 

√

, 

À

, 

U

, 

,

: 1/4 sec. to 1/4000 sec.  

/

: 4 sec. to 1/500 sec.

N

/

M

/

<

: 4 sec. to 1/4000 sec. 

>

: 30 sec. to 1/4000 sec.

Bulb (Up to 30 sec.)

Top 4-frame: Number of recorded frames: up to 4 frames

(Max. 1.5 frames/sec.)

Final 4-frame: Number of recorded frames:

last 4 frames before releasing the shutter button
(Max. 1.5 frames/sec.)

Long-period continuous shooting mode:

Number of recorded frames: up to 40 frames.
(Max. 1.1 frames/sec.)

± 1/3 EV, ± 2/3 EV, ± 1 EV

Mode: Auto focus, Continuous AF, Manual focus
AF system: TTL contrast-type
AF frame selection: AF (CENTER), AF (MULTI), AF (AREA)

The camera does not
emit any sound.

Frame erase does not
erase the frame.

The ERASE ALL function
does not erase all the
frames.

Screens are not
displayed in English.

There is no image or
sound on the TV.

The TV image is black
and white.

When connecting the
camera to a PC, the
photographed image or
playback image appears
on the camera’s screen.

Nothing happens when
using the Mode dial.

The camera no longer
works correctly.

Cannot print with
PictBridge.

The camera was
connected to a PC when
the USB mode was set to
“

®

”.

i The camera volume is set too low.
i The microphone was blocked during

shooting/recording.

i There is something covering the speaker

during playback.

Some frames may be protected.

A language other than English is selected in
the “

ô

” 

setting in the “

˜

” SET-

UP menu (

➡P.100).

i The included A/V cable was connected

during movie playback.

i The camera is not connected to the TV

correctly.

i “TV” is selected as the TV input.
i The “

õ

” video output setting is incorrect.

i The TV volume is turned down.

The “

õ

” video output setting is incorrect.

i The USB cable (mini-B) is not correctly

connected to the PC or camera.

i The PC is not turned on.

i Camera malfunction.

i The batteries have run out.

The camera has suffered an unforeseen
problem.

“

®

” PICTBRIDGE is not selected in “

ò

”

USB mode in the “

˜

” SET-UP menu.

i Adjust the volume.
i Take care not to block the microphone

during shooting/recording.

i Make sure that the speaker is uncovered.

Unprotect frames using the camera on which
the protection was first applied.

1Press the “MENU/OK” button to display the

menu.

2Press “a” or “b” to select “

˜

” SET-UP and

press “c”.

3Press “a” or “b” to select “

ô

” .

4Press “c”.
5Press “a” or “b” several times to select

“ENGLISH”.

6Press the “MENU/OK” button.

i After the movie playback mode is stopped,

connect the camera and TV correctly.

i Connect the camera and TV correctly.

i Set the TV input to “VIDEO”.
i Change the setting to “NTSC” or “PAL”

(

➡P.100).

i Adjust the volume.

Change the setting to “NTSC” or “PAL”
(

➡P.100).

i Set up the camera, and connect the USB

cable (mini-B) correctly.

i Turn the PC on.

i Briefly remove the batteries or disconnect

the AC power adapter. Then reload the
batteries or reconnect the AC power adapter
and try again.

i Load new or fully charged batteries.

Briefly remove the batteries or disconnect the
AC power adapter. Then reload the batteries
or reconnect the AC power adapter and try
again. If you think the camera is faulty,
contact your FUJIFILM dealer.

Select “

®

” PICTBRIDGE in “

ò

” USB

mode in the “

˜

” SET-UP menu.

Perform steps 1 to 3 to remove the camera
from the PC.
h Windows
1 The “New Hardware Found” wizard or

“Scanner and Camera” wizard appears. If the
wizard does not appear, proceed to step 3.

2 Click the [Cancel] button.
3 Disconnect the camera from the PC.

h Macintosh
1 The window for locating the driver appears.

If the window does not appear, proceed to
step 3.

2 Click the [Cancel] button.
3 Disconnect the camera from the

Macintosh.