Fujifilm 40i Guide D’Installation Rapide

Windows

Updating the USB Driver on a Windows PC

Updating the USB Driver for Windows 98 and Windows Me

1. Switch on your PC and launch Windows 98 or

Windows Me.

2. Insert the CD-ROM provided into the CD-ROM drive.

3. Open the “My Computer” window, double-click

“UNIN_FUM.EXE” in the “\USBDRV\WIN98\UNINST”
folder on the CD-ROM and remove the installed
driver.

Close all files when removing drivers.

4. Install the new driver (See P.7).

Updating the Windows 2000 Professional USB Driver

1. Switch on your PC and launch Windows 2000

Professional.

2. Insert the CD-ROM provided into the CD-ROM drive.

3. Load a media containing photographed images

into your camera, switch the camera on and set the
Mode dial to “Playback” mode.

4. Connect the camera and PC using the USB cable.

5. Open the Control Panel, click “System” and open

the System Properties dialog box.

6. Select the “Hardware” tab and click the [Device

Manager] button.

7. Click “Universal Serial Bus Controller” in the

Device Manager window, then click the right
mouse button on “USB Mass Storage” and select
“Properties” in “Action” menu.

Update the USB Driver in the following situations:

(1) When you want to upgrade the driver version
(2) When you have installed the driver but the software does not run

NOTE

7. Downloading the MP3 files:

Click the [Transfer] button to download MP3 files
registered in Audio Downloading Software to a
SmartMedia (card) with ID.

8. Other functions:

• To delete music (SVQ) files on a SmartMedia (card)

with ID, select the music (SVQ) file from the file list
and click the [Delete/Cancel] button.

• To change the playback order, select the music

(SVQ) file on the SmartMedia (card) with ID and
then drag and drop the file to the desired playback
position in the list display area.

• If you have switched the camera off or changed the

SmartMedia (card) with ID, click the [Refresh]
button to update the information displayed.

9. Click the [Exit] button to exit the Audio Downloading

Software.

10.

Check that the camera display indicates that data
access is no longer in progress.

On Windows 2000 Professional, click the eject icon [ ] on the taskbar when the
camera display indicates that data access is no longer in progress and remove
“USB Mass Storage”.

11. Disconnect the USB cable and remove the SmartMedia.

• Do not perform any of the following operations while the “Access in progress”

message is displayed on the camera. Doing so can corrupt data on the
SmartMedia and could damage the media itself.
Switch the camera off/Touch any of the camera control buttons/Disconnect the
USB cable/Remove the media/Open the media cover/Remove the camera batteries

• Do not format the SmartMedia in the camera on your PC. Doing so may prevent

you from using the SmartMedia to take pictures.

• Always check that the “Access in progress” message is no longer displayed on

your camera. Do not disconnect the USB cable or remove the SmartMedia
immediately after the progress bar displayed during MP3 file transfer
disappears. When large data files are transferred, camera access may continue
for some time after the progress bar is no longer displayed on your PC.

• Refer to the camera Owner’s Manual for more information on the access

display on the camera.

• In Windows 2000 Professional, disconnecting the USB cable without performing

the “Unplug or Eject hardware” procedure can cause the computer to hang.

NOTE