Fujifilm v10 Manuel D’Utilisation

107

106

Digital camera FinePix V10

5.1 million pixels

1/2.5-inch Super CCD HR

xD-Picture Card (16/32/64/128/256/512 MB/1 GB)

Still image: DCF-compliant

Compressed: Exif ver.2.2 JPEG, DPOF-compatible

✽ Design rule for Camera File System compliant DPOF compatible

Movie: AVI format, Motion JPEG
Audio: WAVE format, Monaural sound

Still image: 2592 

× 1944 pixels/2736 × 1824 pixels/2048 × 1536 pixels/

1600 

× 1200 pixels/640 × 480 pixels (÷/„/3/2/`)

See the table on P.108.

Fujinon 3.4

× optical zoom lens

F2.8-F5.5

f=6.3 mm-21.6 mm
(Equivalent to approx. 38 mm-130 mm on a 35 mm camera)

Approx. 5.7

× (3.4× optical zoom lens is used together: Max. zoom scale: 19.4×)

F2.8/F7.4 (Automatic switching)

Normal: approx. 60 cm (2.0ft.) to infinity
Macro: Wide-angle: approx. 9 cm (3.5 in.) to 80 cm (2.6 ft.) 

Telephoto: approx. 39 cm (1.3 ft.) to 80 cm (2.6 ft.)

AUTO/Equivalent to ISO 64/100/200/400/800/1600

TTL 256-zones metering

Program AE

À (NATURAL LIGHT), À&d (À&WITH FLASH), m (PORTRAIT), 
, (LANDSCAPE), . (SPORT), © (NIGHT)

–2 EV to +2 EV in 1/3 EV-step increments (s)

4 sec. to 1/2000 sec. (depend on Exposure mode)

Top 3-frame: Number of recorded frames: up to 3 frames

(Max. 2 frames/sec.)

Final 3-frame: Number of recorded frames:

last 3 frames before releasing the shutter button
(Max. 2 frames/sec.)

Long-period continuous shooting mode:

Number of recorded frames: up to 40 frames

Mode: Auto focus
AF system: TTL contrast-type
AF frame selection: AF (CENTER), AF (MULTI)

Automatic scene recognition/Preset (Fine, Shade, Fluorescent (Daylight),
Fluorescent (Warm White), Fluorescent (Cool White), Incandescent)

Approx. 10 sec./2 sec.

Auto flash
Effective range (û:AUTO): Wide-angle: approx. 60 cm-4.4 m (2.0 ft.-14.4 ft.) 

Telephoto: approx. 60 cm-2.3 m (2.0 ft.-7.5 ft.)

Auto, Red-Eye Reduction, Forced Flash, Suppressed Flash, Slow Synchro, 
Red-Eye Reduction + Slow Synchro

3.0 inches, Aspect ratio: 4:3; approx. 230,400 pixels low temperature polysilicon
TFT, Color LCD monitor, Approx. 100% coverage

640 

× 480 pixels/320 × 240 pixels (%/$)

(30 frames per second with monaural sound)
A series of continuous image can be recorded up to available recording time per
xD-Picture Card. Zoom cannot be used during movie recording.

High-speed shooting, Best framing, Post shot assist window, Frame No. memory

Trimming, Image rotate, Automatic playback, Multi-frame playback, Sorting by
date, Voice memo

PictBridge, Exif print, Language (English, Francais, Deutsch, Español, Italiano,

, 

), Time difference, FinePix photo mode (p-mode), Game

eIf you think the camera is faulty, check the following once more.

The camera does not 
emit any sound.

i The camera volume is set too low.
i  The microphone was blocked during 

shooting/recording.

i  There is something covering the speaker 

during playback.

i Adjust the volume.
i  Take care not to block the microphone 

during shooting/recording.

i  Make sure that the speaker is uncovered.

Frame erase does not 
erase the frame.

Some frames may be protected.

Unprotect frames using the camera on 
which the protection was fi rst applied.

T h e   E R A S E   A L L  
function does not erase 
all the frames.

Screens are not 
displayed in English.

A language other than English is selected 
in the “

ô

” 

  setting in the “

˜

” 

SET-UP menu (

➡P.78).

1  Press the “MENU/OK” button to display 

the menu.

2  Press “a” or “b” to select “

˜

” SET-UP 

and press “c”.

3  Press “a” or “b” to select “

ô

” 

4  Press “c”.
5  Press “a” or “b” to select “ENGLISH”.
6  Press the “MENU/OK” button.

There is no image or 
sound on the TV.

i  The included A/V cable was connected 

during movie playback.

i  The camera is not connected to the TV 

correctly.

i “TV” is selected as the TV input.
i The “

õ

” video output setting is incorrect.

i The TV volume is turned down.

i  After the movie playback mode is stopped, 

connect the camera and TV correctly.

i Connect the camera and TV correctly.

i Set the TV input to “VIDEO”.
i  Change the setting to “NTSC” or “PAL” 

(

➡P.78).

i Adjust the volume.

The TV image is black 
and white.

The “

õ

” video output setting is incorrect.

Change the setting to “NTSC” or “PAL” (

➡P.78).

When connecting the 
c a m e r a   t o   a   P C ,   t h e  
photographed image or 
playback image appears 
on the camera’s LCD 
monitor.

i  The USB cable (included) is not correctly 

connected to the PC or camera.

i The PC is not turned on.

i  Set up the camera, and connect the USB 

cable (included) correctly.

i Turn the PC on.

Nothing happens when 
using the Mode switch.

i Camera malfunction.

i The battery has run out.

i  Briefl y remove the battery or disconnect 

t h e   A C   p o w e r   a d a p t e r .   T h e n   r e l o a d  
the battery or reconnect the AC power 
adapter, and try again.

i  Load a fully charged battery.

The camera no longer 
works correctly.

The camera has suffered an unforeseen 
problem.

Briefl y remove the battery or disconnect the 
AC power adapter. Then reload the battery, 
or reconnect the AC power adapter, and 
try again. If you think the camera is faulty, 
contact your FUJIFILM dealer.

C a n n o t   p r i n t   w i t h  
PictBridge.

“

®

” PICTBRIDGE is not selected in “

ò

” 

USB mode in the “

˜

” SET-UP menu.

Select “

®

” PICTBRIDGE in “

ò

” USB 

mode in the “

˜

” SET-UP menu (

➡P.78).

T h e   c a m e r a   w a s  
connected to a PC when 
the USB mode was set 
to “

®

”.

Perform steps 1   to  3   to remove the 
camera from the PC.
h Windows
1  The “Found New Hardware” wizard or 

“Scanner and Camera” wizard appears. 
If the wizard does not appear, proceed to 
step 3.

2 Click the [Cancel] button.
3 Disconnect the camera from the PC.
h Macintosh
1  T h e   w i n d o w   f o r   l o c a t i n g   t h e   d r i v e r  

appears. If the window does not appear, 
proceed to step 3.

2 Click the [Cancel] button.
3  D i s c o n n e c t   t h e   c a m e r a   f r o m   t h e  

Macintosh.