Fujifilm v10 Manuel D’Utilisation

12

13

Turn the camera on and check the battery level indicator on the LCD monitor.

1 There is ample battery charge.
2 The battery is almost half charged.
3 There is insufficient charge left in the battery.

The battery will soon run out. Have a new
battery ready.

4 The battery is depleted. The display will shortly

go blank and the camera will stop working.
Replace or recharge the battery.

1

2

4

3

“

Z

”, “

E

” or “

Ã

” appears as a small icon on

the left-hand side of the LCD monitor.

●

Depending on the camera mode, the transition from “

Ã

” to

“

V

” may occur more quickly.

●

Due to the nature of the battery, the battery level indicator
(

E

, 

Ã

or 

V

) may appear early when the camera is

used in cold locations. This is normal. Try warming the
battery in your pocket or a similar location before use.

“

V

” appears as a large icon in the center of the

LCD monitor.

1 Plug the connection cable into the AC power

adapter.

2 Plug the AC power adapter into a power outlet.
h Compatible AC power adapters

AC-5VW (included)
AC-5VX (sold separately)

●

Always use the FUJIFILM products listed on the above.

●

See P.101 for notes on using the AC power adapter.

●

The socket-outlet shall be installed near the equipment and
shall be easily accessible.

●

The shape of the plug and socket-outlet depends on the
country of use.

◆

◆

When the Auto power off function is active and the camera is left unused for 2 or 5 minutes, the
function turns the camera off (

➡P.82). To turn the camera back on, press the “POWER” button. To play

back images, hold down the “

w

” button for about 1 second.

0

1

0

2

1 Check that the camera is turned off.
2 Plug the AC power adapter connector into the

“DC IN 5V” socket.

The self-timer lamp lights and battery charging
begins. When charging is completed, the self-timer
lamp turns off.

h Full recharging times for completely depleted

battery
At an ambient temperature of +21°C to +25°C 
(+70°F to +77°F)
NP-40: approx. 2 hours

●

Charging times increase at low temperatures.

●

If the self-timer lamp blinks during charging, a charging error
has occurred and the battery cannot be charged (

➡P.105).

●

Turning the camera on during charging interrupts the
charging.

●

Use the BC-65 Battery Charger (sold separately) to charge
battery more quickly (

➡P.99).

◆

◆

When you try to charge the battery immediately after the camera has been used continuously for a long
period (e.g. shooting a movie or connected to a PC), charging may not begin soon (the self-timer lamp
does not light).
This is not a camera fault, but is for protecting the battery from being charged while it is warm. Battery
may degrade when charged at high temperatures.
Leave the camera connected to the AC power adapter, and charging will automatically begin within 30
minutes.