Spectra Logic treefrog Manuel De Montage
TreeFrog Barcode Scanner Installation Guide
7
Installing a barcode scanner
3.
Rotate the scanner assembly as necessary to move it through the library door and
into the library. Hold the barcode scanner close to the picker, and using your other
hand, gently seat the power cable for the scanner in the socket on the top of the
picker arm.
into the library. Hold the barcode scanner close to the picker, and using your other
hand, gently seat the power cable for the scanner in the socket on the top of the
picker arm.
Note:
The power cable only fits in one way. Do not force the
plug connector into the socket improperly, or you risk damaging
the scanner.
4.
When you have securely connected the power supply, move the scanner assembly
into place on top of the picker arm and align the edges carefully.
into place on top of the picker arm and align the edges carefully.
5.
Press the scanner down firmly over the tab slots. The tabs snap into place, securing
the scanner to the picker arm. Ensure that the back and sides of the scanner are all
firmly snapped into place on the picker.
the scanner to the picker arm. Ensure that the back and sides of the scanner are all
firmly snapped into place on the picker.
6.
You have now completed the scanner assembly procedure. Reconnect the power
and SCSI connections to your TreeFrog, then see
and SCSI connections to your TreeFrog, then see
Plugging the scanner power cable into the picker arm