Spectra Logic treefrog Manuel De Montage
TreeFrog Barcode Scanner Installation Guide
1
Introduction
This guide explains the procedure for installing a barcode scanner in a Spectra Logic
TM
TreeFrog
TM
library. It explains how to replace an existing barcode scanner and how to install a
new scanner in a library without one. It takes about half an hour to correctly install a barcode
scanner.
scanner.
What you need
To install a barcode scanner, you need:
• a small flat-bladed screwdriver
• a work space with enough room for the library
• an approved electrostatic mat and a grounded wrist strap to guard against electrostatic
• a work space with enough room for the library
• an approved electrostatic mat and a grounded wrist strap to guard against electrostatic
discharge
What you received with the installation kit
Your installation kit should contain some or all or the following items:
*this guide
Who can perform this upgrade
To complete this procedure, you need to:
• feel confident working inside electrical equipment
• be familiar with the operating system on the host computer
• be familiar with the library configuration and how to operate and configure the
• be familiar with the operating system on the host computer
• be familiar with the library configuration and how to operate and configure the
TreeFrog
You can find more information on operating the TreeFrog in the AIT TreeFrog User’s
Guide
Guide
or the Travan TreeFrog User’s Guide included with your library.
Part Number
Description
4882
Screws (4)
90870117
Barcode scanner
90870215
Picker cover
90870218
Scanner window
90870767
TreeFrog Barcode Scanner Installation Guide*