Summit ffar2l Mode D'Emploi

•  Remove the interior and exterior packaging 

•  Before connecting the appliance to the power source, let it stand 

upright for approximately 2 hours. This will reduce the possibility of a 
malfunction in the cooling system from handling during transportation. 

•  Clean the interior surface with lukewarm water using a soft cloth. 

 

 

•  Try not to open the door too often, especially when the weather is hot 

and humid.  Once you open the door try to close it as soon as possible. 

•  Every now and then check if the appliance is sufficiently ventilated 

(adequate air circulation behind the appliance). 

•  Set thermostat from higher to lower settings as soon as possible 

(depending on how loaded the appliance is, the ambient temperature 
etc...). 

•  The coils on the rear of the refrigerator should be cleaned and free of 

dust or any other impurities. 

•  Ice and frost layer increase energy consumption, so do clean the 

appliance as soon as the layer is 1/8” thick. 

•  Always consider instructions stated in sections Positioning and Energy 

Saving Tips, otherwise the energy consumption is substantially higher. 

•  Do not place hot foods in the refrigerator.  

•  A cool dry place allows your refrigerator to operate more efficiently so 

keep the refrigerator away from stoves and other heat sources. 

 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 

Instructions for Use